Abstract:With the rapid development of information technology, high-speed digital optical signal transmission technology has become the core of modern communication networks. However, the increase in transmission rates brings challenges such as noise, distortion, and interference, which affect the accuracy of clock recovery. To address these issues, this study proposes a clock recovery algorithm based on the eye diagram opening area to improve the accuracy and efficiency of high-speed digital optical signal jitter measurement. The proposed method extracts clock information from the signal using the opening area and curvature characteristics of the eye diagram for jitter measurement. Experimental results demonstrate that the clock recovery algorithm based on the eye diagram opening area can stably reconstruct the signal eye diagram and obtain jitter parameters under different optical power conditions. At optical powers of -7.2 dBm, -12.2 dBm, and -17.2 dBm, the Q-factors were 8.8, 7.6, and 4.3, respectively, and the RMS jitter values were 12.2 ps, 13.4 ps, and 21.2 ps, respectively. At optical powers of -2.3 dBm, 0.1 dBm, 2.4 dBm, 4.6 dBm, and 6.0 dBm, the Q-factors were 9.1, 9.3, 9.5, 9.7, and 10.0, respectively, and the average jitter values were 8.9 ps, 8.5 ps, 8.0 ps, 7.5 ps, and 7.0 ps. These results indicate that the proposed algorithm performs excellently under low optical power conditions and maintains high recovery accuracy even when jitter increases at higher optical powers. The clock recovery algorithm based on the eye diagram opening area significantly improves the accuracy and stability of high-speed digital optical signal jitter measurement, enriches the theoretical research of clock recovery algorithms, and shows significant advantages in improving signal transmission quality, reducing bit error rate, and enhancing communication link reliability. The research outcomes provide key technical support for the optimization of modern high-speed optical communication systems.

Design on Measurement System for Jitter of High-speed Optical Disc

Jitter testing technology of high-speed optical disc

Design and realization for FOG pure lag test system

A Study and Analysis of High-Accuracy Network Synchronization Based on IEEE1588

Jitter Measurement Method for Multi-level Disc Based on Interpolation Algorithm

High-Quality 3d Shape Measurement By Kernel-Optimized High Sinusoidal Similarity Dither Patterns

A High-precision Displacement Measuring System in SPC

Analysis And Study On Measurement Of Jitter And Its Precision

Jitter Measurement Method for Multi-Level Disc Based on Quadratic Interpolation Algorithm

Threshold-optimized Dithering Technique for High-quality 3D Shape Measurement

Monitoring Method of Micro Flying Head Jitter in Optical Storage

System Design and Simulation of Write Clock Recovery for DVD Data

A Jitter Measurement Circuit Based On Dual Resolution Vernier Oscillator

A statistical jitter tolerance estimation applied for clock and data recovery using oversampling

A 0.2–7.1-Gb/s Low-Jitter Full-Rate Reference-Less CDR for Communication Signal Analyzers

A new on-chip jitter measurement method based on cumulative distribution function

Research on high-speed digital optical signal jitter measurement technology based on clock recovery algorithm using eye diagram opening area

Fully on-chip clock jitter and skew measurement scheme via incoherent subsampling

Design of high-speed and high-dynamic range optic fiber transmission system

A Low Jitter 2.125ghz Serial Link for Optical Transmission

Design of Bit Error Ratio Tester of DVD Mother Disc Based on FPGA