Abstract:For modern SoC systems, stringent requirements on on-chip clock generators include low area, low power consumption, environmental insensitivity, and the lowest possible jitter performance. Multiplying Delay-Locked Loop (MDLL) [1-2], subharmonically injection-locked techniques [3], and sub-sampling techniques [4-5] can significantly improve the random jitter characteristics of a clock generator. However, in order to guarantee their correct operation and optimal performance over process-voltage-temperature (PVT) variations, each method requires additional calibration circuits, which impose difficult-to-meet timing constraints. In the case of an injection-locked PLL (IL-PLL), a free-running frequency calibration is required. However, the output of an injection-locked oscillator is always fixed at the desired frequency, so a shift in the free-running frequency (e.g. caused by temperature and voltage variations) cannot be simply compensated for by using a frequency-locked loop (FLL). Therefore, we propose the use of a dual-loop topology with one free-running voltage-controlled oscillator (VCO) as a replica VCO placed inside a FLL for tracking temperature and voltage drift. The other VCO (the main VCO) is injection locked for producing a low-jitter clock, while the free-running frequency shift can be compensated for by the replica loop. The method provides robust output over temperature and voltage variations.

A Dual-Loop Injection-Locked PLL with All-Digital Background Calibration System for On-Chip Clock Generation

A Compact, Low-Power and Low-Jitter Dual-Loop Injection Locked PLL Using All-Digital PVT Calibration

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 0.022mm2 970µw Dual-Loop Injection-Locked PLL with −243db FOM Using Synthesizable All-Digital PVT Calibration Circuits

A 1.2ps-jitter fully-synthesizable fully-calibrated fractional-N injection-locked PLL using true arbitrary nonlinearity calibration technique

A 0.4-Ps-jitter −52-Dbc-spur Synthesizable Injection-Locked PLL with Self-Clocked Nonoverlap Update and Slope-Balanced Subsampling BBPD

A Fully Synthesizable All-Digital PLL With Interpolative Phase Coupled Oscillator, Current-Output DAC, and Fine-Resolution Digital Varactor Using Gated Edge Injection Technique

An Automatic Place-And-Routed Two-Stage Fractional-N Injection-Locked Pll Using Soft Injection

A Fully Synthesizable Injection Locked PLL with Dual-DCO Frequency Tracking in 55nm CMOS.

An HDL-synthesized Injection-Locked PLL Using LC-based DCO for On-Chip Clock Generation

0.2Mw 70Fsrms-Jitter Injection-Locked PLL Using De-Sensitized SSPD-Based Injecting-Time Self-Alignment Achieving -270Db FoM and -66Dbc Reference Spur

An HDL-synthesized Gated-Edge-injection PLL with a Current Output DAC

A Low Jitter PLL in a 90nm CMOS Digital Process

Design Of Low-Jitter 1-Ghz Phase-Locked Loops For Digital Clock Generation

An Ultra Low Power Integer-N PLL with a High-Gain Sampling Phase Detector for IOT Applications in 65 nm CMOS

A Fully-Synthesizable Fractional-N Injection-Locked PLL for Digital Clocking with Triangle/Sawtooth Spread-Spectrum Modulation Capability in 5-Nm CMOS

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

A 4224 MHz Low Jitter Phase-Locked Loop in 0.13-Μm CMOS Technology

A 6-Ghz 78-Fs $_{\mathrm{rms}}$ Double-Sampling PLL with Low-Ripple Bootstrapped DSPD and Retimer-Less MMD Achieving $-$ 92-Dbc Reference Spur and $-$ 258-Db FOM

A 0.001-Mm$$^{2}$$ 112.32-$$\Upmu $$W All-Digital PLL with Dual-Tuned DCO and Dual-Tuned Control Algorithm

A 0.8 V Low Power Low Phase-Noise Pll