Abstract:The amplitude and phase imbalances of the in-phase (I) and quadrature (Q) branches inherent in the direct conversion receiver structure cause the generation of image frequency interference signals. In this paper, a frequency-domain I/Q imbalance calibration algorithm is proposed for wideband direct conversion receivers. The I/Q imbalance model is rebuilt by applying the infinitesimal method and FFT algorithm. The mathematical expressions for the exact computation of the I/Q imbalance parameters are derived based on the frequency-domain statistical properties of the baseband signal. The two phase parameters, frequency-dependent I/Q imbalance (FD-IQI) and frequency-independent I/Q imbalance (FI-IQI), are separated according to the parity properties of the imbalance parameter. To avoid the interference from the transmitter, the receiver impairment estimation is performed using a frequency offset (FO) DC training signal, and a low-cost real-valued compensation (RVC) filter is introduced to correct the impairments of the received signal. The performances of the proposed calibration model are evaluated through simulations and experiments. The simulation results show that the image rejection ratio (IRR) is improved to 80-120 dBc and can also exceed 40 dBc at high noise levels. The experimental results based on the CX9261A evaluation board show that the average IRR of the multi-tone signal is increased by 24.99 dB, and the IRR of the wideband signal is increased by 19.08 dB.

Circuit noise effect on sampling clock in frequency-domain radio receiver IF digitization

Effect on Pseudo Code Ranging Precision by A/D Sampling Clock Jitter

Impacts of Sampling on the Artificial Noise-Assisted Terahertz Secure Communication Systems

A Frequency-Domain I/Q Imbalance Calibration Algorithm for Wideband Direct Conversion Receivers Using Low-Cost Compensator.

Design Of Frequency Domain A/D Conversion Based Uwb Receiver In The Presence Of Quantization Noise

Fractional Sampling Rate Transformation for Wideband All Digital Receivers

All Digital Tracking Loop for OFDM Symbol Timing

Quantization Noise And Sampling Jitter Impact Of Adc/Dac In Multi-Ifof Based Mobile Fronthaul

Accurate and Cost-Effective Technique for Jitter and Noise Separation Based on Single-Frequency Measurement

Sampling Rate Conversion and Symbol Timing for Ofdm Software Receiver

Simulation Research on Jitter Measurement Using CDF of ADC Output Code

Measurement of Clock Jitter and Distribution with Pico-Second Resolution Using ADC

A pratical method for anti-sampling offset in digtial reciver

Clock jitter measurement technique based on signal-to-noise ratio

Theoretical Analysis On The Sampling Criteria For Time-Interleaved Photonic Analog-To-Digital Converters

Influence of Sampling Jitter on Matched Filtering

A New Predistortion Architecture with Sampling Clock Jitter Mitigation for Wideband Systems

A Bandwidth Mismatch Optimization Technique in Time-Interleaved Analog-to-Digital Converters.

Studies of Improving the Performance of A/D Conversion by Post Band-Pass Filtering Method

Low Complexity Tri-Level Sampling Receiver Design for UWB Time-of-Arrival Estimation

Analysis and Design of Low-Jitter Clock Driver for Wideband ADC