Abstract:In this paper, we present planar mesa termination structure with high k dielectric Al2O3 for high-voltage diamond Schottky barrier diode. Analysis, design, and optimization are carried out by simulations using finite element technology computer-aided design (TCAD) Sentaurus Device software. The performances of planar mesa termination structure are compared to those of conventional field plate termination structure. It is found that optimum geometry of planar mesa terminated diode requires shorter metal plate extension (1/3 of the field plate terminated diode). Consequently, planar mesa terminated diode can be designed with bigger Schottky contact to increase its current carrying capability. Breakdown performance of field plate termination structure is limited at 1480V due to peak electric field at the corner of Schottky contact (no oxide breakdown occurs). In contrast, peak electric field in planar mesa termination structure only occurs in the field oxide such that its breakdown performance is highly dependent on the oxide material. Due to Al2O3 breakdown, planar mesa termination structure suffers premature breakdown at 1440V. Considering no oxide breakdown occurs, planar mesa termination structure can realize higher breakdown voltage of 1751V. Therefore, to fully realize the potential of planar mesa terminated diode, it is important to choose suitable high k dielectric material with sufficient breakdown electric field for the field oxide.

High-Voltage β-Ga 2 O 3 Schottky Diode with Argon-Implanted Edge Termination

High-Voltage ( $\overline{\text{2}}01$ ) $\beta$ -Ga 2 O 3 Vertical Schottky Barrier Diode with Thermally-Oxidized Termination

High-Voltage and High-I ON /I OFF Quasi-Vertical GaN-on-Si Schottky Barrier Diode With Argon-Implanted Termination

Over 1 GW/cm<SUP>2</SUP> Vertical Ga<sub>2</sub>O<sub>3</sub> Schottky Barrier Diodes Without Edge Termination

High-Performance Vertical $\beta$ -Ga 2 O 3 Schottky Barrier Diode with Implanted Edge Termination

A 1.6 Kv Ga2O3 Schottky Barrier Diode with a Low Reverse Current of 1.2 × 10−5 A/cm2 Enabled by Field Plates and N Ion-Implantation Edge Termination

Gan Schottky Barrier Diodes with High-Resistivity Edge Termination Formed by Boron Implantation

8.7 A/700 V Β-Ga2o3 Schottky Barrier Diode Demonstrated by Oxygen Annealing Combined with Self-Aligned Mesa Termination

2.5kV/3.78mΩ·cm 2 Low Forward Voltage Vertical β-Ga 2 O 3 Schottky Rectifier with Field Plate assisted Deep Mesa Termination

Improved Β-Ga2o3 Schottky Barrier Diodes Featuring P-Nio Gradual Junction Termination Extension Within Mesa Structure

8.7 A/700 V β-Ga 2 O 3 Schottky barrier diode demonstrated by oxygen annealing combined with self-aligned mesa termination

2.5Kv/3.78mω⋅cm² Low Forward Voltage Vertical Β-Ga₂o₃ Schottky Rectifier with Field Plate Assisted Deep Mesa Termination

Vertical Β-Ga2o3 Schottky Barrier Diode with the Composite Termination Structure

Vertical β-Ga 2 O 3 Schottky Barrier Diode with the Composite Termination Structure

Β-Ga₂o₃ Lateral Schottky Barrier Diodes with > 10 Kv Breakdown Voltage and Anode Engineering

2.7 Kv Low Leakage Vertical PtOx/β-Ga2O3 Schottky Barrier Diodes with Self-Aligned Mesa Termination

The Investigation of β-Ga<sub>2</sub>O<sub>3</sub> Schottky Diode with Floating Field Ring Termination and the Interface States

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

High Performance Lateral Schottky Diodes Based on Quasi-Degenerated Ga 2 O 3

Over 1 GW/cm 2 Vertical Ga 2 O 3 Schottky Barrier Diodes Without Edge Termination

High Permittivity Dielectric Field-Plated Vertical (001) $β$-Ga$_2$O$_3$ Schottky Barrier Diode with Surface Breakdown Electric Field of 5.45 MV/cm and BFOM of $>$ 1 GW/cm$^{2}$