Abstract:The fundamental mechanism of enhanced interfacial stability of Li/Li1.3Al0.3Ti1.7(PO4)3 enabled by the electronic conductor interlayers is revealed. Compared to the inhibition of electron injection by an ionic conductor layer, which is widely accepted as the key role for stabilizing interfaces, this work emphasizes that the electric field homogenization caused by an electronic conductor layer is of equal importance. The (electro)chemical reactions between Li1.3Al0.3Ti1.7(PO4)3 (LATP) solid‐state electrolyte and lithium metal plague the practical applications of LATP. A commonly used strategy to tackle this issue is to construct an ionic conductor layer to stabilize Li/LATP interface. Herein, it is demonstrated that an electronic conductor interlayer (Al or Ag) can also greatly enhance the interfacial stability of Li/LATP. To unveil the origin of the enhanced interfacial stability, a series of techniques, including in situ electron and optical microscopies, kelvin probe force microscopy, and finite element analysis, is exploited. Control experiments show clearly that Al layer can effectively homogenize the electric field distribution, which enables the uniform growth of interphases and thus prevents stress concentration and crack propagation. Moreover, when coupled with solid polymer electrolyte (SPE) to form Al‐SPE bilayer, it can effectively protect LATP from electron attack and interphase formation. Remarkably, Li symmetrical cells with an Al‐SPE bilayer exhibit superior stability of more than 5000 h at 0.2 mA cm−2, among the best cycling performances to date. This work presents an in‐depth understanding of the mechanism of the enhanced interfacial stability enabled by electronic conductor interlayers, as well as a universal interface architecture to boost the cyclability of solid‐state batteries.

Stabilizing the Interface of NASICON Solid Electrolyte Against Li Metal with Atomic Layer Deposition.

Stabilization the Interface of NASICON-type Solid Electrolyte and Li metal by Al Interlayer

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Stable Interface Between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer

Improving the stability of NASICON-type electrolyte with Li metal anode by interfacial modification

Stabilizing Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub>|Li Metal Anode Interface in Solid-State Batteries by Kevlar Aramid Nanofiber-Based Protective Coating

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries

Stabilized Cathode/Sulfide Electrolyte Interface through Conformally Interfacial Nanocoating for All-Solid-State Batteries

Insights into the Enhanced Interfacial Stability Enabled by Electronic Conductor Layers in Solid‐State Li Batteries

Stabilizing LATP Electrolyte Interface of All-Solid-State Lithium Ion Batteries Consisting of High-Voltage Cathode

Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries

Recent Advances of LATP and Their NASICON Structure As a Solid‐State Electrolyte for Lithium‐Ion Batteries

Stabilizing Li1.3Al0.3Ti1.7(PO4)3|Li Metal Anode Interface in Solid‐State Batteries by Kevlar Aramid Nanofiber‐Based Protective Coating

Constructing Multifunctional Interphase between Li1.4Al0.4Ti1.6(PO4)(3) and Li Metal by Magnetron Sputtering for Highly Stable Solid-State Lithium Metal Batteries

Stabilizing Solid Electrolyte-Anode Interface in Li-Metal Batteries by Boron Nitride-Based Nanocomposite Coating

Engineering and regulating the interfacial stability between Li1.3Al0.3Ti1.7(PO4)3-based solid electrolytes and lithium metal anodes for solid-state lithium batteries

Designing the Interface Layer of Solid Electrolytes for All‐Solid‐State Lithium Batteries

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries

Localization of electrons within interlayer stabilizes NASICON-type solid-state electrolyte

Interface Welding Via Thermal Pulse Sintering to Enable 4.6 V Solid‐State Batteries