Abstract:A nondegrading, low-impedance interface between a solid electrolyte and cathode active materials remains a key challenge for the development of functional all-solid-state batteries (ASSBs). The widely employed thiophosphate-based solid electrolytes are not stable toward oxidation and suffer from growing interface resistance and thus rapid fading of capacity in a solid-state battery. In contrast, NASICON-type phosphates such as Li1+ xAl xTi2- x(PO4)3 and Li1+ xAl xGe2- x(PO4)3 are stable at high potentials, but their mechanical rigidity and high grain boundary resistance are thought to impede their application in bulk-type solid-state batteries. In this work, we present a comparative study of a LiNi0.8Co0.1Mn0.1O2 (NCM-811) cathode composite employing either β-Li3PS4 (LPS) or Li1.5Al0.5Ti1.5(PO4)3 (LATP) as a solid electrolyte. LPS is employed as a separator in both cases to assemble a functional ASSB. To avoid high-temperature processing of LATP, along with subsequent detrimental interfacial reactions with NCM materials, the ASSBs are constructed and operated in a hot-press setup at 150 °C. The cathode interfaces are investigated using in situ electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy, which reveals that the interface resistance is strongly suppressed and the chemical state of the composite is unchanged during cycling when employed with LATP. The cell using LATP is reversibly charged and discharged for multiple cycles and outperforms a comparable cell using a thiophosphate composite electrode. The results indicate that LATP in the cathode composite represents an excellent candidate to overcome interfacial challenges in bulk-type solid-state batteries.

Localization of electrons within interlayer stabilizes NASICON-type solid-state electrolyte

Stabilization the Interface of NASICON-type Solid Electrolyte and Li metal by Al Interlayer

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries

Improving the stability of NASICON-type electrolyte with Li metal anode by interfacial modification

Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries

Stabilizing the Interface of NASICON Solid Electrolyte Against Li Metal with Atomic Layer Deposition.

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries

Stable Interface Between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer

Stabilizing LATP Electrolyte Interface of All-Solid-State Lithium Ion Batteries Consisting of High-Voltage Cathode

Recent Advances of LATP and Their NASICON Structure As a Solid‐State Electrolyte for Lithium‐Ion Batteries

Designing the Interface Layer of Solid Electrolytes for All‐Solid‐State Lithium Batteries

In-situ Fabricated Succinonitrile-Based Composite Electrolyte for High-Performance and Safe Solid-State Lithium Batteries

Ultrathin single-ion conducting polymer enabling a stable Li|Li1.3Al0.3Ti1.7(PO4)3 interface

Ternary Stabilization Strategies for Succinonitrile-Based in Situ Polymerized Electrolyte Enabling High-Performance Solid Lithium Metal Batteries

Metal-Doped NASICON/Polymer Composite Solid Electrolyte for Lithium Titania Anode in Lithium-Ion Batteries

Progress and Perspective of Li 1 + X Al X Ti 2 ‐x ( PO 4 ) 3 Ceramic Electrolyte in Lithium Batteries

Stabilizing Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub>|Li Metal Anode Interface in Solid-State Batteries by Kevlar Aramid Nanofiber-Based Protective Coating

Quasi-Solid-State Lithium Metal Batteries Using the LiNi0.8Co0.1Mn0.1O2-Li1+ xAlxTi2- x(PO4)3 Composite Positive Electrode

High-performance lithium metal batteries based on composite solid-state electrolytes with high ceramic content

Interface engineering of Li<sub>1.3</sub>Al<sub>0.3</sub>Ti<sub>1.7</sub>(PO<sub>4</sub>)<sub>3</ sub> ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries