Abstract:All-solid-state lithium batteries (ASSLBs) combining ultrahigh nickel cathodes have received considerable attention due to their great potential for ensuring safety along with high energy density. Improving the interfacial stability between the cathode and solid electrolyte is crucial for achieving high battery performance. Herein, we first employed in situ electrochemical impedance spectroscopy, galvanostatic cycling, and ex situ time-of-flight secondary ion mass spectrometry techniques to probe the degradation mechanism of the ultrahigh nickel cathode, LiNi0.92Co0.05Mn0.03O2, and amorphous Li2TaCl7 electrolyte at different cut-off voltages of 4.3, 4.6, and 4.8 V. At high charge potentials, LiNi0.92Co0.05Mn0.03O2 cathodes release lattice oxygen, causing the inevitable breakdown of amorphous chlorides and the Li-ion percolating network within the composite cathodes, resulting in a decrease in the capacity and lifespan of the fabricated ASSLBs. In light of these findings, we propose a capacity-cyclability trade-off strategy by reducing the charging voltage, resulting in a durable interface that prevents the generation of lattice oxygen. Specifically, the capacity retention of ASSLBs operating under a high areal capacity of 5 mA h cm-2 remained above 80% for 300 and 600 cycles at 1 and 3 mA cm-2, respectively. Additionally, the lifespan increased sixfold compared to the 4.3 V charging conditions. Our work elucidates the degradation mechanisms of ultrahigh nickel cathodes and amorphous chloride electrolytes and presents a practical strategy for achieving cycling durability of battery. Highly active lattice oxygen released from ultrahigh nickel cathodes degrade chloride solid electrolytes, forming an inert interphase; this phenomenon worsens at higher voltages. Reducing the cut-off voltage markedly enhances ASSLBs' operational lifespan.

Stabilized Cathode/Sulfide Electrolyte Interface through Conformally Interfacial Nanocoating for All-Solid-State Batteries

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Single-Crystal-Layered Ni-Rich Oxide Modified by Phosphate Coating Boosting Interfacial Stability of Li10 SnP2 S12 -Based All-Solid-State Li Batteries.

Surface-modified and sulfide electrolyte-infiltrated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Magicking an oxyhalide interface for 4.8 V‐tolerant high‐nickel cathodes in all‐solid‐state lithium‐ion batteries

Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2−x(PO4)3 solid electrolytes in solid-state lithium batteries

Assembly of An Elastic & Sticky Interfacial Layer for Sulfide-Based All-Solid-State Batteries

Stable Interface Between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer

High-rate and durable sulfide-based all-solid-state lithium battery with in situ Li2O buffering

Slurry-Coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 -Li 3 InCl 6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries

Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries

Nano‐Scale Interface Engineering of Sulfur Cathode to Enable High‐Performance All‐Solid‐State Li–S Batteries

LATP-coated LiNi0.8Co0.1Mn0.1O2 cathode with compatible interface with ultrathin PVDF-reinforced PEO-LLZTO electrolyte for stable solid-state lithium batteries

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Enabling superior electrochemical performance of NCA cathode in Li5.5PS4.5Cl1.5-based solid-state batteries with a dual-electrolyte layer

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries