Abstract:All-solid-state lithium batteries (ASSLBs) combining ultrahigh nickel cathodes have received considerable attention due to their great potential for ensuring safety along with high energy density. Improving the interfacial stability between the cathode and solid electrolyte is crucial for achieving high battery performance. Herein, we first employed in situ electrochemical impedance spectroscopy, galvanostatic cycling, and ex situ time-of-flight secondary ion mass spectrometry techniques to probe the degradation mechanism of the ultrahigh nickel cathode, LiNi0.92Co0.05Mn0.03O2, and amorphous Li2TaCl7 electrolyte at different cut-off voltages of 4.3, 4.6, and 4.8 V. At high charge potentials, LiNi0.92Co0.05Mn0.03O2 cathodes release lattice oxygen, causing the inevitable breakdown of amorphous chlorides and the Li-ion percolating network within the composite cathodes, resulting in a decrease in the capacity and lifespan of the fabricated ASSLBs. In light of these findings, we propose a capacity-cyclability trade-off strategy by reducing the charging voltage, resulting in a durable interface that prevents the generation of lattice oxygen. Specifically, the capacity retention of ASSLBs operating under a high areal capacity of 5 mA h cm-2 remained above 80% for 300 and 600 cycles at 1 and 3 mA cm-2, respectively. Additionally, the lifespan increased sixfold compared to the 4.3 V charging conditions. Our work elucidates the degradation mechanisms of ultrahigh nickel cathodes and amorphous chloride electrolytes and presents a practical strategy for achieving cycling durability of battery. Highly active lattice oxygen released from ultrahigh nickel cathodes degrade chloride solid electrolytes, forming an inert interphase; this phenomenon worsens at higher voltages. Reducing the cut-off voltage markedly enhances ASSLBs' operational lifespan.

Magicking an oxyhalide interface for 4.8 V‐tolerant high‐nickel cathodes in all‐solid‐state lithium‐ion batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Stabilized Cathode/Sulfide Electrolyte Interface through Conformally Interfacial Nanocoating for All-Solid-State Batteries

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Surface-modified and sulfide electrolyte-infiltrated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Insight into Cathode Surface to Boost the Performance of Solid-State Batteries

Deciphering and Overcoming the High-Voltage Limitations of Halide and Sulfide-Based All-Solid-state Lithium Batteries

Dual-functional interfaces for highly stable Ni-rich layered cathodes in sulfide all-solid-state batteries

Ultraconformal chemo-mechanical stable cathode interface for high-performance all-solid-state batteries at wide temperatures

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode for Stable All-Solid-State Sulfide-Based Batteries

Surface Lattice Modulation Enables Stable Cycling of High‐Loading All‐solid‐state Batteries at High Voltages

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes