Abstract:A new inorganic polymer coagulant, poly-silic-ferric sulfate (PSF) with various Si/Fe ratios (PSF0.5, PSF1 and PSF denote Si/Fe molar ratios of 0.5, 1 and 3, respectively), was prepared using water glass, ferrous sulfate and sodium chlorate by co-polymerization, and pH value was measured during the preparation process. The influence of both Si/Fe ratio and reaction time (polymerization time) on the complexation process (bonding mode) between Si and Fe was explored with many analytical methods (such as X-ray diffraction (XRD), ultraviolet/visible absorption (UVA) scanning, transmission electron microscope (TEM), photon correlation spectra (PCS) and infrared spectrum (IR) using PSF samples taken from different reaction time at different Si/Fe ratios. The results show that the characteristics of PSF are largely influenced by both reaction time and Si/Fe ratios. PSF is found to be a complexation compound of Si, Fe and many other ions, instead of a simple mixture of raw materials. The complexation process between Si and Fe may be different from various Si/Fe ratios, namely, the bonding rate, bonding mode and the stability of the bond between Si and Fe are different from various Si/Fe ratios: the polymer based on Si-O-Fe-O-Fe-O-Si bond may be formed at low Si/Fe ratio, in comparison with that based on Si-O-Fe-O-Si-O-Si bond at high Si/Fe ratio; the formation rate of Fe-O-Fe bond is rapid and there may be a mutual acceleration between Fe-O-Fe bond and Si-O-Fe bond, while the formation rate of Si-O-Si is slow and maybe there is a mutual retardation between Si-O-Fe bond and Si-O-Si bond; the stability of Fe-O-Fe bond is weaker than that of Si-O-Fe or Si-O-Si bond.

Preparation, Characterization and Coagulation Behaviour of Polyferric Magnesium Silicate (pfmsi) Coagulant.

Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Research on the preparation of composite polysilicic acid flocculants and their performances

[Analysis of reaction process between Si and Fe in poly-silicic-ferric sulfate (PSF) coagulant]

Preparation and application of polymeric silicate coagulant: a short review

Study on preparation,characterization and application of nano-sized polyferric sulfate coagulant

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Novel Covalently Bound Organic Silicon-Ferrum Hybrid Coagulant with Excellent Coagulation Performance and Bacteriostatic Ability

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Synthesis and Application of PAFSi

Hydrolysis and coagulation behavior of polyferric sulfate and ferric sulfate

Study on the Performance of a Novel Inorganic Polymeric Flocculant

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material