Abstract:ZSM-5 zeolite has good hydrothermal stability and is widely used in fields such as hydrocarbon catalytic cracking and nitrogen oxide removal. In this study, a simple crystal seed solution assisted method was developed for the synthesis of ZSM-5 zeolite without template from solid waste. The perlite tailings are not suitable for traditional perlite industrial production due to their small particle size. It was used as the main silicon source and the sole aluminum source to synthesis ZSM-5 zeolite. The effects of synthesis conditions, such as SiO2/Al2O3, Na2O/SiO2 and H2O/SiO2 molar ratios, on the properties of the products were investigated, and the best preparation conditions were optimized. The crystallization mechanism of the crystal seed solution assisted method to synthesis ZSM-5 zeolite from the perlite tailings was explored. In addition, the Cu-ZSM-5 catalyst was prepared by copper ion exchange method, and its performance of selective catalytic reduction (SCR) of NOx was studied. The experimental results showed that the product ZSM-5 zeolite has a high degree of crystallization and typical hexagonal pyramid morphology. The as-synthesized ZSM-5 zeolite had a large specific surface area, and it had both micropores and mesopores. The as-synthesized Cu-ZSM-5 catalyst had a wide denitrification activity window of 230-500 degrees C (denitrification efficiency of more than 90%) and N2 selectivity was over 96% in the temperature range of 100-540 degrees C. The crystal seed solution induced crystallization strategy can be used to prepare zeolites catalysts with high silica-alumina ratio from pearlite waste by one-step method. This method has a good industry application prospect due to simple steps and lower cost.

Self‐Propagating High‐Temperature Synthesis of Zirconolite Using CuO and MoO3 as the Oxidants

Self-propagating high-temperature synthesis of ZrO2 incorporated Gd2Ti2O7 pyrochlore

Study on Synthesis of Zirconolite Using Simulated Radioactive Incineration Ash

Rapid synthesis of zirconolite ceramic wasteform by microwave sintering for disposition of plutonium

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Process Development of Zirconolite Ceramics for Pu Disposition: Use of a CuO Sintering Aid

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Synthesis of Corrosion-Resistant MFI-type Zeolite Coatings by Solid-Conversion Secondary Growth Without Solvent

Phase and structural evolution of zirconolite ceramics prepared by solid-state reaction sintering

Synthesis of Ca1-xCexZrTi2-2xAl2xO7 zirconolite ceramics for plutonium disposition

Self-propagating high-temperature synthesis of refractory powder materials based on zirconium diboride obtained from boron-containing mineral raw materials of the Republic of Kazakhstan

Probing into the optimum preparation and the chemical durability of Sr0.5Zr2(PO4)3-SmPO4 dual-phase ceramics for nuclear waste forms via in-situ synthesis

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

One-step Synthesis of Zeolite ZSM-5 from Perlite Tailings by Crystal Seed Solution Assisted Method

Synthesis of ZSM-5 Microspheres Made of Nanocrystals from Iron Ore Tailings by the Solid-Phase Conversion Method

Zrb2/Al2o3 Composite Powders Prepared by Self-Propagating High-Temperature Synthesis

Phase structure evolution and chemical durability studies of Ce-doped zirconolite–pyrochlore synroc for radioactive waste storage

Synthesis of ZrC hollow nanospheres at low temperature

Hydrothermal synthesis and characterization of (Zr1−xSnx)TiO4 (x = 0.05–0.20) powders

Self-Propagating High-Temperature Synthesis of Composite Material Based on Stabilized Zirconium Oxide1

Production of Zirconium-Niobium Alloys for Nuclear Reactors Fuel Rods via SHS Process