Abstract:CaO, as a mineral oxide adsorbent, has excellent arsenic trapping performance. Still, it has a flaw that inhibits its application: at high temperatures, CaO begins to sinter and ruduces its adsorption capacity. In this work, the anti-sintering ZrO 2 /CaO composite adsorbent was fabricated by the citric acid sol-gel process and applied for the first time in As 2 O 3 adsorption studies in flue gas at 500–900 °C. A combination of experimental and theoretical analytical methodologies was adopted to explore the influence of Zr modification on the behaviour of CaO adsorption of As 2 O 3 and the adsorption mechanism of As 2 O 3 on ZrO 2 /CaO. The experimental findings demonstrate that the introduction of ZrO 2 not only significantly increases the specific surface area of the adsorbent and provides more adsorption sites, but also provides a large number of free electrons for the conversion of adsorbed oxygen in the system, which effectively promotes the reaction process of the chemical oxidation of As(III) to As(V). Furthermore, the partial CaZrO 3 structure formed by chemical bonding of ZrO 2 with CaO significantly improves the sintering resistance of ZrO 2 /CaO at high temperatures. Therefore, the adsorption capacity of the prepared ZrO 2 /CaO for As 2 O 3 reaches 857.7 mg/kg at 900 °C, which is approximately 16 times greater than that of untreated CaO. Meanwhile, the microscopic mechanism of ZrO 2 /CaO adsorbent was further investigated by density functional theory (DFT). The analysis revealed that the Zr site is the main active adsorption site of ZrO 2 /CaO. During the adsorption of arsenic, Zr undergoes strong electron-orbital hybridization with the O atoms of the system and arsenic to form a stable ZrO 6 octahedral structure, which promotes the strong stability of the chemisorption system. ZrO 2 /CaO has remarkable arsenic trapping ability and resistance to sintering, and is a composite adsorbent material with great potential for arsenic removal.

Study on Synthesis of Zirconolite Using Simulated Radioactive Incineration Ash

Immobilization Behavior of Cerium Ions in the Zirconolite Ceramic Solidified Radioactive Waste Forms

Self‐Propagating High‐Temperature Synthesis of Zirconolite Using CuO and MoO3 as the Oxidants

Rapid synthesis of zirconolite ceramic wasteform by microwave sintering for disposition of plutonium

Phase and structural evolution of zirconolite ceramics prepared by solid-state reaction sintering

Effect of Mass Fraction of CeO2 on Structure of Zirconolite-based Glass-ceramics

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Process Development of Zirconolite Ceramics for Pu Disposition: Use of a CuO Sintering Aid

Synthesis, Characterization and Sintering Behaviour of Indialite Ceramic from Fly Ash.

Synthesis of Ca1-xCexZrTi2-2xAl2xO7 zirconolite ceramics for plutonium disposition

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Phase structure evolution and chemical durability studies of Ce-doped zirconolite–pyrochlore synroc for radioactive waste storage

Effect of Si/Zr molar ratio on the sintering and crystallization behavior of zircon ceramics

Synthesis and Characterization of Yttria-Doped Mesoporous Zirconia

Effects of zirconium source and content on zirconia crystal form, microstructure and mechanical properties of ZTM ceramics

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Synthesis and Infrared Radiation Properties of Cordierite-Zirconia Composite Powders

Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia

Preparation and densification study of sodium zirconium phosphate-doped microwave-sintered uranium tailing ceramics

Chemically bonded zirconium oxide into CaO-based high-temperature coal-fired flue gas As 2 O 3 absorbents for enhanced anti-sintering properties: Experimental and DFT study