Abstract:The distribution of second phase particles in the microstructure of composite ceramics affects the mechanical properties, and the intragranular structures often result in better properties compared to the intergranular structures. However, it is difficult to obtain composite ceramics with intragranular structure by conventional route. To produce composite ceramics with an intragranular structure in a simpler route. In this work, starting powders with different phase compositions were obtained by the co-precipitation method, and zirconia toughened alumina (ZTA) composite ceramics were prepared with these starting powders by spark plasma sintering (SPS). The results show that it is easier to fabricate ZTA composite ceramics with an intragranular structure by using composite powders containing amorphous or transition phase Al2O3 as starting materials. The phase composition of the powder prepared by the co-precipitation method after calcination at 1100 °C is θ-Al2O3 and t-ZrO2, and the average grain size after sintering at 1500 °C is 1.04 ± 0.28 μm, and the maximum Vickers hardness and fracture toughness of the specimens reach 19.37 ± 0.43 GPa and 6.18 ± 0.06 MPa·m1/2, respectively. The ZrO2 particles were the core of crystallization and grow together with the Al2O3 matrix, forming the intragranular structure of ZTA ceramics. This work may provide a new idea for preparing composite ceramics with intragranular structure.

Synthesis and Infrared Radiation Properties of Cordierite-Zirconia Composite Powders

Structural, Microstructure, Mechanical and Electrical Properties of Porous Zr4+-Cordierite Ceramic Composites

Co-precipitation Synthesis and Thermal Stability of Zircon Encapsulated Carbon Black

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Synthesis of Cordierite Powders by Low Temperature Combustion Method

Research Progress on Preparation and Properties of Zirconium Carbide Matrix Composites

Zirconia-Mullite Obtained from Co-Precipitated Zirconia-Mullite Composite Powders by Sps

Preparation and study of the mechanical and optical properties of infrared transparent Y 2 O 3 –MgO composite ceramics

Preparation of Cordierite Powder by Chemical Coprecipitation–rotation Evaporation and Solid Reaction Sintering

Preparation of Porous Spodumene/zircon Composite Ceramics and Its Thermal and Mechanical Properties

High-efficiency preparation of zircon ceramics using borosilicate glass as sintering additive

Densification of Zirconia Doped Yttria Transparent Ceramics Using Co-Precipitated Powders

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Effect of annealing temperature on the microstructure, dielectric, and microwave absorption performance of precursor blends derived ZrSiOCN ceramics

Zirconia Toughened Alumina Ceramics via Forming Intragranular Structure

Investigation of electrical, corporeal, ocular, and aquaphobic properties of zirconia thin-films by varying substrate temperature for high voltage insulators

Insight of precursor concentration, particle size and band gap of zirconia nanoparticles synthesized by co-precipitation method

Synthesis of yttria-stabilized zirconia powders for plasma spray by internal gelation

Influence of Crystal Inducing Agent on the Phase Structure and Optical Properties of Nano Zirconia

Effects of composite nucleating agents on crystallization behavior and properties of fluorphlogopite glass-ceramics

Sintering Behavior and Mechanical Properties of Alumina-Coated Zirconia Ceramics