Abstract:Yttria-stabilized zirconia (YSZ) is a fine ceramics material that has been applied to dental implants and mechanical components. As YSZ is a hard, brittle, and chemically stable material, that undergoes phase transformation during mechanical loading, it is difficult to fabricate nanostructures using mechanical processing methods. In this study, a surface structuring method using a femtosecond pulsed laser was proposed, which is effective in suppressing the mechanical loading-induced phase transformation. As the material properties of YSZ vary with the concentration of yttria dopant , polycrystalline zirconia samples with different yttria concentrations (2, 3, 5, and 8 mol%) were used to investigate the effect of yttria concentrations on laser processing characteristics for nanostructuring. At all concentrations, nanopore generation in the surface grain was achieved by laser irradiation near the ablation threshold. In addition, there was no significant change in the crystal structure before and after laser irradiation, and no damage to the bulk occurred. At 2 mol%, intergranular cracks were generated around the pores. By increasing the dopant level to 5 mol%, the lens effect of the crystal grains became stronger due to enhanced grain growth, and the diameter and number of pores increased. In addition, pores formed preferentially on smaller grains at 5 mol%. However, for YSZ with 8 mol%, the pore formation phenomenon was different from that in the lower dopant level, as the area near the grain boundary was preferentially ablated, and microcracks formation and exfoliation of the surface also occurred. These results contribute to a deeper understanding of the laser ablation characteristics of zirconia with different dopant levels and to the development of surface structuring methods for fine ceramics materials.

Influence of Crystal Inducing Agent on the Phase Structure and Optical Properties of Nano Zirconia

Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material

Preparation of Zirconia Powders by Sol-gel Process

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Evolution of the Crystalline Structure of Zirconia Nanoparticles During Their Hydrothermal Synthesis and Calcination: Insights into the Incorporations of Hydroxyls into the Lattice

Nano-scale Mechanical Behaviors and Material Removal Mechanisms of Zirconia Ceramics Sintered at Various Temperatures

Phase transition of nanostructure zirconias doped with rare earth elements.

Tetragonal‐to‐Monoclinic Phase Transitions in Nanocrystalline Rare‐Earth‐Stabilized Zirconia Prepared by a Mild Hydrothermal Method

Crystal structure and morphology of CeO2 doped stabilized zirconia ceramics under high-frequency microwave field sintering

Phase Composition Controllable Preparation of Zirconia Nanocrystals Via Solvothermal Method

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Synthesis and Characteristics of Nanocrystalline YSZ by Homogeneous Precipitation and Its Electrical Properties

Study of Factors Influencing the Microstructure and Phase Content of Ultrafine Y-Tzp

Nano-dispersed yttria-stabilized zirconia powder: Phase, morphology, and conductivity investigation with different chelating agents via a modified sol-gel method

Photoluminescence of nanometer zirconia powders

Influences of preparation parameters on the structural and catalytic performance of zirconia in isosynthesis

Mechanical Properties and Microstructures of Sintered Zirconia Ceramics Implanted by Titanium Ions with MEVVA Sources

Preparation of Zirconia-Doped Titania Nanopowders by Co-Precipitation Method and Corresponding Phase Transformation

Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores

Effect of Sintering Temperature on Part Physical Properties of Zirconia Dental Ceramic