Abstract:Time-based ADC is gaining popularity in medium-resolution high-speed (GS/s) analog-to-digital conversion, due to its capability to achieve faster conversion rates by scaling the time step T LSB through advanced process technology. The conversion speed (f s ) of an N-bit resolution TDC is primarily dominated by the T LSB , represented by f s $< 1/(2^{\mathrm{N}+1}\times \mathrm{T}_{\text{LSB}})$ . Several methods have been proposed to accelerate the speed by reducing T LSB . The vernier delay line design in [1] produces the T LSB by adjusting delay skew (T d1 -T d2 ). Ref. [2] utilizes phase interpolation to generate multi-phase clock outputs with uniform time intervals (1.375 ps). Additionally, the selective delay tuning cell [4] achieves a 500fs T LSB . These circuit implementations have enabled a significant reduction in T LSB . However, further reducing T LSB in traditional active inverter-based delay line of TDC poses several challenges: 1) The jitter budget of T LSB incorporates the random jitter (RJ) introduced by noise in voltage-to-time converter (VTC) and active delay line, as well as determination jitter (DJ) generated by the power supply ripple. In particular, the jitter budget should satisfy the bit error ratio (BER) requirement in communication system. 2) From the perspective of PVT variation calibration for T LSB , reducing T LSB requires higher calibration accuracy, leading to an increased complexity of the calibration circuit. 3) As the T LSB is reduced, a larger transconductance (gm) of input pair becomes critical for enhancing the precision of the dynamic time comparator. Consequently, this leads to an increase in power consumption, particularly during low slew-rate edge transitions.

An 8-Bit 4Fs-Step Digitally Controlled Delay Element with Two Cascaded Delay Units

A 8bits, 6.2ps Resolution Two-Step Time-to-digital Converter with Set-Reset-based Arbiters and Signal Tracking Mechanism

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

A 1.3mW 8-bit Two-step Time-to-Digital Converter

A 1ps Resolution Two-Step Time-to-digital Converter Using Parallel Digital-to-time Converters

8-bit 4-Gsps Time-Interleaved ADC Based on Digital Post-Processing Calibration

Implementation of Time Interleaved ADC Based on Delay Line

A 12bit 39ps Two-Step Time-to-Digital Converter in 40nm CMOS

A Wide Range and High Resolution Two-Step TDC for Millimeter-Wave Band ADPLL

A High-Resolution Time-To-Digital Converter Based on Parallel Delay Elements

An Asynchronous Delay Line TDC for ADPLL in 0.13um CMOS.

An 8-Bit 1.5-Gs/s Voltage–Time Hybrid Two-Step ADC with Cross-Coupled Linearized VTC

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

Large dynamic range digital delay with sub-picosecond precision

A Three-Step Multi-Resolution Time-to-Digital Converter.

A High-Resolution, High-Linearity, Two-Step Time-to-Digital Converter for Wideband Counter-Assisted ADPLL in 0.13um CMOS

A 10-Bit 2.5-Gs/s Two-Step ADC with Selective Time-Domain Quantization in 28-Nm CMOS

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

Design of a 20-Gsps 12-Bit Time-Interleaved Analog-to-digital Conversion System

A 5gs/s 38.04db SNDR Single-Channel TDC-Assisted Hybrid ADC with $\lambda/4$ Transmission Line Based Time Quantizer Achieving a PVT Robustness 416.6fs Time Step

A New Method of Waveform Digitization Based on Time-Interleaved A/D Conversion