Abstract:Many applications, such as multi-standard wireless and event-driven IoT devices, demand high-resolution ADCs with scalable sampling rate and power consumption. The conventional pipelined ADC can achieve high resolution, but its power does not scale well with the sampling rate due to the use of a closed-loop static OTA for residue amplification. While the OTA can be turned off to save power, it requires considerable time for the bias circuit and CMFB loop to settle when waking up, leading to wasted power and reduced peak operation frequency. Using an open-loop dynamic amplifier can make power scale linearly with frequency, but its gain varies with PVT and often requires background calibration, which converges slowly and is incompatible with event-driven applications. The ring-amp is a promising solution as it features closed-loop operation, easy duty-cycling, and decaying power over time [1]-[4]. However, its stability depends on the dead zone size, which typically requires trimming across PVT variations. Besides, the 1st stage has a constant operating point during amplification, which consumes considerable energy. A recent work proposed a 2-stage floating inverter amplifier (FIA) that is fully dynamic and works in closed-loop [5]. It guarantees stability and does not need dead zone control. Moreover, the power consumptions of all stages decay over time naturally. Nevertheless, its low open-loop gain of 33dB is inadequate for a high-resolution pipelined ADC, and its fast-quenching 2 <sup>nd</sup> stage reduces the amplifier speed, limiting the usage in high-speed designs.

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A $4.96\mu\mathrm{W}$ 15b Self-Timed Dynamic-Amplifier-Based Incremental Zoom ADC

A 4.96-Μw 15-Bit Self-Timed Dynamic-Amplifier-Based Incremental Zoom ADC

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 188.6-Μw Continuous-time Incremental Delta-Sigma ADC with Extended Counting Achieving 95.2-Db SNDR and 175.4-Db FoMSNDR

A 12bit 800ms/s Time-Interleaving Pipeline ADC in 65nm CMOS

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers

A 0.4-to-40MS/s 75.7dB-SNDR Fully Dynamic Event-Driven Pipelined ADC with 3-Stage Cascoded Floating Inverter Amplifier

A 1.8-V 14-Bit Inverter-Based Incremental Sigma Delta Adc For Cmos Image Sensor

A 10.12μw 101.98Db-Sndr Three-step Incremental Analog-to-Digital Converter

A $130\mu \mathrm{w}$ Three-Step DT Incremental $\displaystyle \delta\sum$ ADC Achieving 107.6db DR and 99.3db SNDR with Zoom and Extended-Range Counting

A 2.44-Microwatt 93.2-Db SNDR ΔΣ ADC Based on Swing-Enhanced Floating Inverter Amplifier with 60× Power/Bandwidth Scalable Range

A power-efficient 14-bit 250MS/s pipelined ADC

A 8-bit 125-MSample/s pipelined ADC

A 4-Channel 8-Bit 650-Msample/s DAC with Interpolation Filter for Embedded Application.

A 1.8-V 14-bit inverter-based incremental ΣΔ ADC for CMOS image sensor.

A 95-Db DR Second Order Incremental ΣΔ ADC for Multi-Channel Healthcare Application