Abstract:High-resolution ($>$ 100dB SNDR), kHz-BW ADCs are required by emerging Io $\top$ and smart sensing applications. These ADCs are desired for their high efficiency, but low cost and ease of integration are also required, especially to be compatible with the advanced CMOS processes that the loT processor prefers. The state-of-the-art solutions in this scenario, such as the zoom ADC [1], the DT or CT-DSM [2]–[3], and the SAR ADC [4] and its noise-shaping variants [5], have already achieved great energy efficiency with >180dB FOMs. However, most of them are large in area, and rely heavily on the analog performance of old CMOS technologies with high supply voltages. In this work, we propose a new architecture that combines the counting ADC and CT-incremental-DSM (CT-IDSM) in a zoom ADC framework. The proposed architecture is not only power efficient, but also compact in area, highly digital, and friendly to process down-scaling. It operates at Nyquist sampling, supporting single-shot conversion and channel multiplexing. Besides this, it provides a high-impedance input with full-scale common-mode rejection, allowing direct driving by many signal sources. Fabricated in 28nm CMOS, the prototype zoom-incremental-counting (ZIC) ADC is measured to have 103dB SNDR at 20kSa/s, consuming 475 $\mu$ W from a 0.9V supply. The resulting 176dB FOMs is comparable to the state-of-the-art designs. It occupies only 0.014mm2, which is a magnitude or two smaller than most reported ADCs with $>$ 90dB SNR.

A 188.6-Μw Continuous-time Incremental Delta-Sigma ADC with Extended Counting Achieving 95.2-Db SNDR and 175.4-Db FoMSNDR

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A $4.96\mu\mathrm{W}$ 15b Self-Timed Dynamic-Amplifier-Based Incremental Zoom ADC

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A High-Performance, Low-Power Σ Δ ADC for Digital Audio Applications

A 4.96-Μw 15-Bit Self-Timed Dynamic-Amplifier-Based Incremental Zoom ADC

A Power-Efficient Continuous-Time Incremental Sigma-Delta Adc for Neural Recording Systems

A $130\mu \mathrm{w}$ Three-Step DT Incremental $\displaystyle \delta\sum$ ADC Achieving 107.6db DR and 99.3db SNDR with Zoom and Extended-Range Counting

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

Design of Sigma-Delta ADC with High-speed and Continuous-time

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

Analysis and Design of Continuous-Time Incremental Sigma-Delta Modulators with Extended Counting Technique

A 1.8-V 14-Bit Inverter-Based Incremental Sigma Delta Adc For Cmos Image Sensor

A 1-V 23-Μw 88-Db DR Sigma-Delta ADC for High-Accuracy and Low-Power Applications.

Continuous Time Sigma Delta Adc Design and Non-Idealities Analysis

16.2 A 9gs/s 1Ghz-Bw Oversampled Continuous-Time Pipeline ADC Achieving −161dbfs/hz NSD

A 1V 14b Self-Timed Zero-Crossing-based Incremental ΔΣ ADC.