Abstract:The ubiquitous use of sensing and signal processing is increasing exponentially with the advance of the Internet of Everything (IoE). In this context, the design of every time more power efficient sensor nodes is a must. Within these nodes, one of the most power-hungry components are the analog-to-digital converters (ADC). These components are used everywhere to translate real-world analog signals into computer intelligible digital signals. One of the promising architecture for the sensing of physiological signals is the level crossing ADC due to the sparse characteristics of those signals. One of the challenges to improve the power efficiency of this type of ADC lies in the use of continuous comparators to keep track of the input signal within the voltage references. The aim of this work is to investigate the impact of using continuous comparator which can be turned off without incurring error to the conversion of the level crossing ADC. New boundaries will be set for the correct behavior of the level crossing ADC together with the conditions for power saving with the proposed architecture. A 1V 5-bits level crossing ADC was implemented using the TSMC 0.18um process and fabricated for laboratory measurements. The ADC consumes 12.2uW during tracking state and with the proposed technique, the reduction of the average power can go from 4.2% to 45.5% depending on the activity and the type of the input signal.

A 1V 14b Self-Timed Zero-Crossing-based Incremental ΔΣ ADC.

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A $4.96\mu\mathrm{W}$ 15b Self-Timed Dynamic-Amplifier-Based Incremental Zoom ADC

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A Sub-1μW 16-Bit Fully Dynamic Zoom ADC Compatible with Free-running and Incremental Modes Using Residue Feedforward and Extended Counting Techniques

A 4.96-Μw 15-Bit Self-Timed Dynamic-Amplifier-Based Incremental Zoom ADC

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

A 188.6-Μw Continuous-time Incremental Delta-Sigma ADC with Extended Counting Achieving 95.2-Db SNDR and 175.4-Db FoMSNDR

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 1.8-V 14-bit inverter-based incremental ΣΔ ADC for CMOS image sensor.

A 1.8-V 14-Bit Inverter-Based Incremental Sigma Delta Adc For Cmos Image Sensor

Fully Digital Second-order Level-crossing Sampling ADC for Data Saving in Sensing Sparse Signals

A 1.2V 62.2dB SNDR SAR-Assisted Event-Driven Clockless Level-Crossing ADC for Time-Sparse Signal Acquisition

A 500-MS/s 9-Bit Time-Domain ADC Using a Nonbinary Successive Approximation TDC

A $130\mu \mathrm{w}$ Three-Step DT Incremental $\displaystyle \delta\sum$ ADC Achieving 107.6db DR and 99.3db SNDR with Zoom and Extended-Range Counting

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

Incremental Delta-Sigma ADCs: A Tutorial Review

A 0.5 V 10-bit SAR ADC with offset calibrated time-domain comparator

A 1V 5-bits Low Power Level Crossing ADC with OFF state in idle time for bio-medical applications in 0.18um CMOS