Abstract:In optical communication systems, coherent detection is a standard method. The received signal enters the digital domain after passing through a time-interleaved analog-to-digital converter (TI-ADC). However, the time delay of the ADC brings noise into the signal, which decreases the signal quality; therefore, ADC calibration is essential. At present, there are many calibration methods for time delay, but their performances are not satisfactory at a high sampling frequency. This paper presents a method of time delay estimation and calibration in a coherent optical communication system. First, the expected maximum (EM) method is used to roughly estimate the time delay and then transfer the estimated value into the trained back propagation (BP) neural network to generate more accurate results. Second, the sampled signal is reconstructed, and then a finite impulse response (FIR) filter is designed to compensate for the time delay. There are several advantages of the proposed method compared with previous works: the convergence with a BP network is faster, the estimation accuracy is higher, and the calibration does not affect the sample operation of the ADC working in the background mode. In addition, the proposed calibration method does not need additional circuits and its low power consumption provides more sources for dispersion compensation, error correction, and other subsequent operations in the coherent optical communication system. Based on the quadrature phase shift keying (QPSK) system, the proposed method was implemented in a 16-channel/8-bit, 40-GS/s ADC. After estimation and calibration, the relative error of estimation was below 1%, the signal noise distortion rate (SNDR) reached 55.9 dB, the spurious free dynamic range (SFDR) improved to 61.2 dB, and the effective number of bits (ENOB) was 6.7 bits. The results demonstrate that the proposed method has a better calibration performance than other methods.

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

A Novel Time Delay Estimation and Calibration Method of TI-ADC Based on a Coherent Optical Communication System

Photonic serial implementation of a flash analog-to-digital converter.

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

Photonic sampling analog-to-digital conversion based on time and wavelength interleaved ultra-short optical pulse train generated by using monolithic integrated LNOI intensity and phase modulator.

Differentially Encoded Photonic Analog-to-Digital Conversion Based on Phase Modulation and Interferometric Demodulation

Basic Theoretical Model and Sampling Criteria for Time-Interleaved Photonic Analog-to-Digital Converters

Proposal for Photonic Quantization with Differential Encoding Using a Phase Modulator and Delay-Line Interferometers.

Photonic analog-to-digital conversion based on photonic time stretch and compressive sensing with optical random mixing

Sub-Nyquist Sampled Analog-to-Digital Conversion Based on Photonic Time Stretch and Compressive Sensing with Optical Random Mixing

Optoelectronic Hybrid ADC Based on Time-Interleaved Multi-Wavelength Pulse Generation

TI-ADC multi-channel mismatch estimation and calibration in ultra-high-speed optical signal acquisition system

Time-Frequency Uncertainty in the Photonic A/D Converters Based on Spectral Encoding

A 5gs/s 38.04db SNDR Single-Channel TDC-Assisted Hybrid ADC with $\lambda/4$ Transmission Line Based Time Quantizer Achieving a PVT Robustness 416.6fs Time Step

High-speed Optical Hold Module in Optical Assisted ADC

Photonic Time-Wavelength Pulse Interleaver on Silicon

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

Spurious-free Dynamic Range Improvement in a Photonic Time-Stretched Analog-to-digital Converter Based on Third-Order Predistortion

Dual Frequency Comb Assisted Analog-to-Digital Conversion of Subcarrier Modulated Signals

An All-Digital Background Calibration Technique for M-Channel Downsampling Time-Interleaved ADCs Based on Interpolation

A 14-Bit 200-Ms/s Time-Interleaved Adc with Sample-Time Error Calibration