Abstract:We examined the effects of aluminum (Al) capping layer thickness on the electrical performance and stability of high-mobility indium–gallium–tin oxide (IGTO) thin-film transistors (TFTs). The Al capping layers with thicknesses (tAls) of 3, 5, and 8 nm were deposited, respectively, on top of the IGTO thin film by electron beam evaporation, and the IGTO TFTs without and with Al capping layers were subjected to thermal annealing at 200 °C for 1 h in ambient air. Among the IGTO TFTs without and with Al capping layers, the TFT with a 3 nm thick Al capping layer exhibited excellent electrical performance (field-effect mobility: 26.4 cm2/V s, subthreshold swing: 0.20 V/dec, and threshold voltage: −1.7 V) and higher electrical stability under positive and negative bias illumination stresses than other TFTs. To elucidate the physical mechanism responsible for the observed phenomenon, we compared the O1s spectra of the IGTO thin films without and with Al capping layers using X-ray photoelectron spectroscopy analyses. From the characterization results, it was observed that the weakly bonded oxygen-related components decreased from 25.0 to 10.0%, whereas the oxygen-deficient portion was maintained at 24.4% after the formation of the 3 nm thick Al capping layer. In contrast, a significant increase in the oxygen-deficient portion was observed after the formation of the Al capping layers having tAl values greater than 3 nm. These results imply that the thicker Al capping layer has a stronger gathering power for the oxygen species, and that 3 nm is the optimum thickness of the Al capping layer, which can selectively remove the weakly bonded oxygen species acting as subgap tail states within the IGTO. The results of this study thus demonstrate that the formation of an Al capping layer with the optimal thickness is a practical and useful method to enhance the electrical performance and stability of high-mobility IGTO TFTs.

AZO Thin Film Transistor Performance Enhancement by Capping an Aluminum Layer

Influence of Annealing Temperatures on Solution-Processed Alinzno Thin Film Transistors

Effect of Al Doping on Performance of ZnO Thin Film Transistors

Effect Of O-2 Incorporation During The Channel Fabrication Process On Aluminum-Doped Zinc Oxide Thin-Film Transistor Characteristics

High Performance RF Sputtering Deposited AZO Thin-Film Transistors after a Post-Annealing Process

Performance Enhancement Of Carbon Nanotube Thin Film Transistor By Yttrium Oxide Capping

Electrical Performance and Stability Improvements of High-Mobility Indium–Gallium–Tin Oxide Thin-Film Transistors Using an Oxidized Aluminum Capping Layer of Optimal Thickness

Improved Field-Effect Mobility of In–Ga–Zn–O TFTs by Oxidized Metal Layer

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing

Bi-layer Channel AZO/ZnO Thin Film Transistors Fabricated by Atomic Layer Deposition Technique

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

Performance Improvement of Atomic Layer-Deposited ZnO/Al2O3Thin-Film Transistors by Low-Temperature Annealing in Air

High-Performance Thin-Film Transistors with ZnO/Al2O3 Superlattice Channel Fabricated by Atomic Layer Deposition

Huge mobility enhancement of InSnZnO thin-film transistors via Al-induced microstructure regularization

Atomic Layer Deposition Deposited Al-Doped ZnO Films for Transistor Application

P‐1.12: Vacuum Annealing Treatment on High‐Performance AlZnO Thin Film Transistors

High Performance Aluminum-Doped Zno Thin Film Transistors with High-K Gate Dielectrics Fabricated at Low Temperature

Al-Doped Zno Thin-Film Transistors on Flexible Plastic Substrate

Effects of channel structure consisting of ZnO/Al2O3 multilayers on thin-film transistors fabricated by atomic layer deposition

Effective encapsulation of ZnO thin film transistors controlled by thermal energy

Mobility Enhancement and OFF Current Suppression in Atomic-Layer-Deposited ZnO Thin-Film Transistors by Post Annealing in O2