Abstract:Capacitive displacement transducers (CDTs) have been widely used in many physical sensors, attributing to high-resolution, simple electricity and easy manufacturing process. Gap-variation CDTs generally have higher displacement resolution due to small electrode gaps but suffer from the pull-in effect, the nonlinear effect and squeeze-film damping; whereas area-variation CDTs have intrinsically good linearity and much smaller slide-film damping. However, the parallel-plate-based area-variation CDTs have the electrode width much larger than the electrode gap with negligible fringe effect; therefore, the sensitivity is limited by periodic electrode numbers. In this paper, we introduce a novel fringe-effect dominated area-variation CDT with a much higher sensitivity within a certain electrode-deployable area. Both theoretical and numerical analysis are applied to investigate the working principle of the CDT design. The proposed fringe-effect-based CDT benefits from a much larger capacitance-to-displacement sensitivity than the traditional periodic array parallel-plate-based CDT, due to the more displacement-sensitive fringe field and more deployable electrode periods. A set of experiments are designed, and the proposed area-variation CDTs are evaluated. Experimental results suggested that the proposed CDT design, which had equal electrode width, separation and gap, could universally be applied to sensors with different featured dimensions either in macroscale or microscale. Angular misalignments with both out-of-plane tilts and in-plane rotations, which affect the output offset and sensitivity, should be minimized or alleviated. The proposed fringe-effect-based CDT are successfully applied to a single-axis in-plane sensing micro-electromechanical systems (MEMS) accelerometer, showing a noise floor as low as 0.25 ng/Hz $^{\mathrm {1/2}}$ @1 Hz. The corresponding displacement noise of the proposed CDT is 0.1 pm/Hz $^{\mathrm {1/2}}$ .

High-Sensitivity Encoder-Like Micro Area-Changed Capacitive Transducer for a Nano-g Micro Accelerometer.

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Study of a Novel Micromachined Capacitive Accelerometer

Novel Area-Changed Capacitive Methods for Simultaneous Displacement Transducing and Force Balance in a Nano-g MEMS Accelerometer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

A method for improving out-of-plane robustness of an area-changed capacitive displacement transducer used in a micro-accelerometer

A High-resolution Area-change-based Capacitive MEMS Accelerometer for Tilt Sensing

A Universal High-Sensitivity Area-Variation Capacitive Displacement Transducer (CDT) Based on Fringe Effect

A nano-g MEMS accelerometer for earthquake monitoring

A High-Voltage Closed-Loop SC Interface for a ± 50 G Capacitive Micro-Accelerometer with 112.4 Db Dynamic Range

Novel Capacitive Sensing System Design of A Microelectromechanical Systems Accelerometer for Gravity Measurement Applications

A high-resolution area-change-based capacitive MEMS tilt sensor

An Improved Capacitive Sensor for Detecting the Micro-Clearance of Spherical Joints

A Novel Tunable Lateral Sensing Capacitive Silicon Micromachined Accelerometer with High Sensitivity

Consideration of the Fringe Effects of Capacitors in Micro Accelerometer Design

A Low-Noise Closed-Loop Interface For High-G Capacitive Micro-Accelerometer

An Area-Variant Type MEMS Capacitive Sensor Based on a Novel Bionic Swallow Structure for High Sensitive Nano-Indentation Measurement

A Novel Capacitive Micromachined Transducer for Micro-Pressure Measurement

Noise Analysis and Optimization of Front-End Circuit in Ultra-High Precision Capacitive Transducer

Closed-loop Micro-Accelerometer Based on Capacitive Sensing Interface ASIC

Design, Modeling and Analysis of Highly Reliable Capacitive Microaccelerometer Based on Circular Stepped-Plate and Small-Area Touch Mode