Abstract:In earthquake monitoring, an important aspect of the operational effect of earthquake intensity rapid reporting and earthquake early warning networks depends on the density and performance of the deployed seismic sensors. To improve the resolution of seismic sensors as much as possible while keeping costs low, in this article the use of multiple low-cost and low-resolution digital MEMS accelerometers is proposed to increase the resolution through the correlation average method. In addition, a cost-effective MEMS seismic sensor is developed. With ARM and Linux embedded computer technology, this instrument can cyclically store the continuous collected data on a built-in large-capacity SD card for approximately 12 months. With its real-time seismic data processing algorithm, this instrument is able to automatically identify seismic events and calculate ground motion parameters. Moreover, the instrument is easy to install in a variety of ground or building conditions. The results show that the RMS noise of the instrument is reduced from 0.096 cm/s2 with a single MEMS accelerometer to 0.034 cm/s2 in a bandwidth of 0.1-20 Hz by using the correlation average method of eight low-cost MEMS accelerometers. The dynamic range reaches more than 90 dB, the amplitude-frequency response of its input and output within -3 dB is DC -80 Hz, and the linearity is better than 0.47%. In the records from our instrument, earthquakes with magnitudes between M2.2 and M5.1 and distances from the epicenter shorter than 200 km have a relatively high SNR, and are more visible than they were prior to the joint averaging.

A nano-g MEMS accelerometer for earthquake monitoring

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Single Chip-Based Nano-Optomechanical Accelerometer Based on Subwavelength Grating Pair and Rotated Serpentine Springs

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Compact Micromachined Interferometric Accelerometer Based on the Diffraction Grating

An Optical Interferometry Based MEMS Accelerometer Applicable to Seismic-Grade Measurement

A Novel Scheme Design of a High-G Optical NEMS Accelerometer Based on a Single Chip Grating with Proper Sensitivity and Large Bandwidth

A MEMS-Based Electrochemical Angular Accelerometer With Integrated Plane Electrodes for Seismic Motion Monitoring

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control

A Low Noise Capacitive MEMS Accelerometer with Anti-Spring Structure

High-resolution MEMS inertial sensor combining large-displacement buckling behaviour with integrated capacitive readout

Improved Resolution and Cost Performance of Low-Cost MEMS Seismic Sensor through Parallel Acquisition

A high sensitivity piezoelectric MEMS accelerometer based on aerosol deposition method

A MEMS Resonant Accelerometer for Low-Frequency Vibration Detection

Sub-micro-g Resolution Test of Accelerometers Based on Tilt Dynamic Modulation in Gravity Field

A MEMS Based Fabry–Pérot Accelerometer with High Resolution

A microchip optomechanical accelerometer

A micromachined angular-acceleration sensor for geophysical applications

In-plane Dual-axis MEMS Resonant Accelerometer with A Uniform Sensitivity