Abstract:In recent years, there has been widespread interest in the design of microair vehicles (MAVs) for flapping flight with high-aspect ratio wings due to their high efficiency and energy savings. However, the flexibility of a flapping wing causes the aeroelastic effect, which remains a subject of investigation. Generally, existing research simulates active bending and twisting of flexible wings under the assumption of neglecting flapping inertia. In this research, the kinematic optimization of a bionic wing with passive deformation in forward flight while undergoing flapping and pitching is considered. To this end, a computational aeroelasticity framework, which includes the three-dimensional unsteady vortex lattice method (UVLM) and the Newmark-β method, is constructed for flapping flight. Under the assumption of linear elastic deformation, this tool is capable of simulating attached flows over a thin wing and capturing unsteady effects of wakes. A bionic numerical wing with an aspect ratio of 6.5, chord Reynolds number of 1.9 × 105, and reduced frequency less than 0.1 is investigated in kinematic optimization. The computational aeroelasticity framework is combined with a global optimization algorithm to identify the optimal kinematics that maximize the propulsive efficiency under the minimum average lift constraint. Two types of numerical wings, rigid wing and flexible wing, are considered here to compare the influence of deformation on the aerodynamics of the flapping wing. The results show that the aeroelastic effect, which increases the flapping amplitude, yields a significant improvement in terms of propulsive efficiency. In addition, the optimization algorithm maximizes the thrust efficiency while satisfying the required lift. Moreover, the optimal kinematics of both the rigid wing and the flexible wing reach the maximum flapping angle, which indicates that a larger range of motions is needed for optimal kinetics when loosening the boundary conditions.

Analysis and Optimization of a Camber Morphing Wing Model

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Aeroelastic model and analysis of an active camber morphing wing

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

Enhanced Range and Endurance Evaluation of a Camber Morphing Wing Aircraft

Surrogate-based aerodynamic shape optimization of a morphing wing considering a wide Mach-number range

Unsteady Lifting-Line Theory for Camber Morphing Wings State-Space Aeroelastic Modeling

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Design of Compliant Mechanism-Based Variable Camber Morphing Wing with Nonlinear Large Deformation

Modeling, Simulation and Implementation of a Bird-Inspired Morphing Wing Aircraft

Design Of Morphing Wing Leading Edge With Compliant Mechanism

A morphing wing with cellular structure of non-uniform density

Kinematic Optimization of a Flexible Wing Undergoing Flapping and Pitching

Morphing wing design of truss-braced-wing aircraft through aerodynamic shape optimization using the adjoint method

Influence of bioinspired morphing on the flow field characteristics of UAV wings at low Reynolds number

(2015). Fluid–Structure Interaction Analysis of the Fish Bone Active Camber Mechanism. Journal of Aircraft , 52 (1), 307-319.

A variable camber wing concept based on corrugated flexible composite skin

Design and Validation of the Trailing Edge of a Variable Camber Wing Based on a Two-Dimensional Airfoil

Comparative Analysis of Improved Aerodynamic Performance: Computational Fluid Dynamics Study of the Trailing Edge Morphing Concept Parameters

Aero-structural optimization and analysis of a camber-morphing flying wing: Structural and wind tunnel testing

Variable Camber Optimization Design of a Natural Laminar Airfoil