Abstract:Adaptive, morphing flaps are taking ever-increasing attention in civil aviation thanks to the expected benefits this technology can bring at the aircraft level in terms of high-lift performance improvement and related fuel burnt reduction per flight. Relying upon morphing capabilities, it is possible to fix a unique setting for the flap and adapt the flap shape to match the aerodynamic requirements for take-off or landing. The proper morphed shapes can assure better high-lift performances than those achievable by referring to a conventional flap. Moreover, standing the unique flap setting for take-off and landing, a dramatic simplification of the flap deployment systems may be achieved. As a consequence of this simplification, the deployment system can be fully hosted in the wing, thus avoiding under-wing nacelles with significantly better aerodynamics and fuel consumption. The first step for a rational design of an adaptive flap consists in defining the target morphed shapes and the unique optimal flap setting in the take-off and landing phases. In this work, aerodynamic optimization analyses are carried out to determine the best flap setting and related morphed shapes in compliance with the take-off and landing requirements of a reference civil transport aircraft. Four different initial conditions are adopted to avoid the optimization falling into local optima, thus obtaining four groups of optimal candidate configurations. After comparing each candidate's performance through 2D and 3D simulations, the optimal configuration has been selected. 2D simulations show that the optimal configuration is characterized by a maximum lift increase of 31.92% in take-off and 9.04% in landing. According to 3D simulations, the rise in maximum lift equals 22.26% in take-off and 3.50% in landing. Numerical results are finally verified through wind tunnel tests, and the aerodynamic mechanism behind the obtained improvements is explained by carefully analyzing the flow field around the flap.

Morphing wing design of truss-braced-wing aircraft through aerodynamic shape optimization using the adjoint method

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

Comparative Analysis of Improved Aerodynamic Performance: Computational Fluid Dynamics Study of the Trailing Edge Morphing Concept Parameters

Application Status and Future Prospect of Aircraft Morphing Wing

A review of modelling and analysis of morphing wings

Surrogate-based aerodynamic shape optimization of a morphing wing considering a wide Mach-number range

Development of a Morphing Wing with Adaptive Capability

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Design and Aerodynamic Characteristics of a Span Morphing Wing

Design and Experiment of a Seamless Morphing Trailing Edge

Review on the Structure Design of Morphing Winglets

Aerodynamic-driven Morphing Aircraft and Its Overall Design

Unsteady aerodynamic characteristics of a morphing tail configuration

Enhanced Range and Endurance Evaluation of a Camber Morphing Wing Aircraft

Aerodynamic Optimization of an Adaptive Flap for Next-Generation Green Aircraft

Multidisciplinary optimization methodology for truss-braced wing aircraft using high-fidelity structure sizing

Design and Rigid-Flexible Dynamic Analysis of a Morphing Wing Eight-Bar Mechanism

Conceptual Research on a Mono-Biplane Aerodynamics-Driven Morphing Aircraft

Conceptual Design of Compliant Structures for Morphing Wingtips Using Single-Row Corrugated Panels

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Design and Validation of the Trailing Edge of a Variable Camber Wing Based on a Two-Dimensional Airfoil