Abstract:Abstract Commercial aircraft today require efficient high-lift and control systems on the wings to reduce the drag in flight or decrease the take-off and landing speeds. Morphing mechanisms are one approach for improved high-lift systems. In most cases the objective function is an increased lift to drag ratio or the noise reduction. On closer examination control systems as well as morphing mechanisms are located in a certain wing segment. The transition between a moving wing part and the fixed wing is a step, which creates additional vortices. This segments the wing in span-wise direction and reduces the efficiency. A flexible skin between a moving and a fixed wing parts smooths the contour and minimize the efficiency reduction of the wing. A full scale demonstrator of a wing segment was manufactured with two flexible skin designs. The first subcomponent connects a morphing leading edge with a rib of the wing over a span of one meter. The skin is a material mix of ethylene-propylene-diene monomer (EPDM) rubber and fiberglass-reinforced plastic. The rubber is the basis of the skin and the glass-fiber is added as local skin stiffeners in the form of strips in chord-wise direction. The second subcomponent blends the aileron with a rib of the wing in a triangular design. The connection of three different hinges realizes a morphing triangle, which is loaded in an in-plane shear only state of stress in each aileron position. The core of the triangle is a 3D printed structure, which is free in shear. The covering skin is a combination of EPDM with carbon fibers oriented in +/−30° direction to obtain shear compliance and to resist the loads on the triangle. The deformation of each concept is identified at the demonstrator. Therefore, an optical measurement system scans the surface in the initial and deflected state. The required deformation precision of the concepts differs due to their design. The contour at the leading edge requires a certain shape over the span. The analysis of the skin buckling is one requirement at the transition triangle during the aileron motion. The experimental results show a smooth transition contour at the leading edge and no buckling effects at the triangle. The results can be used for the validation of simulation models. Furthermore, both skin concepts cover the gap between a moving wing segment and a fixed wing part. The elimination of steps in span-wise direction can improve the aero-acoustic behavior along the wing for future aircraft.

A variable camber wing concept based on corrugated flexible composite skin

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

High Actuation Capability and Smooth-Deformation Piezo Morphing Wing Based on Multi-Layer Parallel Pre-Compressed MFC Bimorph

A Variable Wingspan Scroll Telescopic Wing for Multimodal Underwater Vehicles

Design and Validation of the Trailing Edge of a Variable Camber Wing Based on a Two-Dimensional Airfoil

Unsteady Flow Simulation of a Variable-Sweep Morphing Aircraft Coupled with Flight Control System

On the Vein-Stiffening Membrane Structure of a Dragonfly Hind Wing

Design of Compliant Mechanism-Based Variable Camber Morphing Wing with Nonlinear Large Deformation

Aeroelastic model and analysis of an active camber morphing wing

Autonomous Material Composite Morphing Wing

Conceptual Design of Compliant Structures for Morphing Wingtips Using Single-Row Corrugated Panels

Design of a variable-sweep wing structure with flexible shear skin

Design, kinematic and fluid-structure interaction analysis of a morphing wing

Experimental Study of Flexible Skin Designs Between a Moving Wing Segment and a Fixed Wing Part on a Full Scale Demonstrator

Active compound shape/vibration control of piezo-actuated variable camber wing section via hybrid feedback/feedforward control scheme

Enhanced Range and Endurance Evaluation of a Camber Morphing Wing Aircraft

Research on variable camber wing driven by ultrasonic motors

Design of a morphing leading edge as a high lift device for a regional aircraft

Design and Shape Monitoring of a Morphing Wing Trailing Edge

Numerical Study of a Supercritical Airfoil/wing with Variable-Camber Technology

Unleashing the Potential of Morphing Wings: A Novel Cost Effective Morphing Method for UAV Surfaces, Rear Spar Articulated Wing Camber