Abstract:Surface Acoustic Wave (SAW) filters provide precise frequency filtering in RF and IF range with a tiny footprint. Metallic thin films are the essence of such modern SAW filter technology. However, SAW filters realized using NiCr/Al thin films are limited to power levels of ~5 dBm at RF frequencies. This limitation on power level is due to the acousto-migration phenomenon in thin films at higher power levels. In order to enhance the power durability of SAW filters, the preferred oriented growth of Al along (111) crystallographic direction is one of the methods to reduce acousto-migration. This paper explores the growth and characterization of different metallization schemes (NiCr/Al & Ti/Al) on different piezoelectric wafers to achieve oriented Al (111) film growth. Metallic thin films were deposited using electron beam evaporation technique. High Resolution X-Ray Diffraction (HR-XRD) and Four Point Probe Method were used for crystallographic characterization and Sheet Resistance (SR) measurement, respectively. Atomic Force Microscopy (AFM) and surface profiler were used to characterize the surface morphology of the deposited films. FWHM of 4.12 degree of rocking curve on Al (111) peak has been achieved for Ti/Al metal film deposited on ST-X Quartz piezoelectric wafer along with low sheet resistance of 124 mΩ/sq. A deposition rate of 1 Å/s for Ti and 7 Å/s for Al at a deposition temperature of 100 °C gave the best FWHM value for Al (111) orientation on ST-X Quartz wafer. Space qualification tests were also successfully performed on Ti/Al metalized wafers under extreme environmental conditions. The results obtained in this work demonstrate the suitability of Ti as an under layer to grow preferred oriented Al film along (111) orientation and thus to be used in the fabrication of high-power SAW devices for space applications.

Growth and Characterization of Polyimide-Supported AlN Films for Flexible Surface Acoustic Wave Devices

Flexible Surface Acoustic Wave Device with Aln Film on Polymer Substrate

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Preparation Technique Of Aln Piezoelectric Thin Film

Surface acoustic wave devices fabricated on epitaxial AlN film

Preparation of Aln Thin Films for Film Bulk Acoustic Resonator Application by Radio Frequency Sputtering

Characterisation of Aluminium Nitride Films and Surface Acoustic Wave Devices for Microfluidic Applications

Growth of AIN Films by RF Reactive Magnetron Sputtering for Film-Bulk-Acoustic-Wave-Resonator Fabrication

Pulsed-laser-deposited epitaxial aluminum nitride films on (111) Si for surface acoustic-wave applications

Integration of diamond-like carbon and AlN for acoustic wave devices

Theoretical and Experimental Study of High-Electromechanical-Coupling Surface Acoustic Wave Resonators Based on A-Plane (1120)al0.56sc0.44n Films

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive direct-current magnetron sputtering

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive DC magnetron sputtering

An Investigation of the Structural and Surface Topography of Aluminum Nitride Thin Films Deposited at Low Sputtering Power for Piezoelectric Applications

Growth and Characterization of Al (111) Thin Film on Piezoelectric Wafers for SAW Device Fabrication for Space Applications

High-Performance SAW Resonators Based on Single-crystalline a-Plane AlN Thin Films on Sapphire Substrates

Preparation of Highly C-Axis Oriented AlN Thin Films on Hastelloy Tapes with Y2O3 Buffer Layer for Flexible SAW Sensor Applications

The Characterization of Surface Acoustic Wave Devices Based on AlN-Metal Structures.

Preparation, Characterization, and Application of AlN/ScAlN Composite Thin Films

Enhancement of c-Axis Oriented Aluminum Nitride Films via Low Temperature DC Sputtering

Improved performances of AlN/polyimide hybrid film and its application in redistribution layer