Abstract:Surface acoustic waves (SAWs) are of practical importance across several fields. Particularly, a wide range of SAW devices is available, which are based on the stacking piezoelectric layered hetero-structures. As such, efficient and stable algorithm of analyzing electromechanical coupling factor (K2) should be of specific interest, inspiring a variety of piezoelectric layered structures. Motivated by the above considerations, this paper exploits the performance of Sc43% AlN57%/ZnO/diamond piezoelectric hetero-structures using matrix and polynomial methods. Consequently, dispersion curves, the electromechanical coupling factor and profiles of Rayleigh waves are calculated, in which the properties of hexagonal intermediate ZnO layer are varied. Here, $$ (0001) - [10\bar{1}0]{\text{ZnO}} $$ or $$ (11\bar{2}0) - [0001]{\text{ZnO}} $$ directions of the middle layer were integrated with Sc43% AlN57%/diamond to be a composite hetero-structure with a larger K2 of SAW. Accordingly, a commercial ZnO specimen was characterized by scanning electron microscopy (SEM) as well as Raman and XRD spectroscopy to determine its available crystallographic directions and the C-axis hexagonal character. Comparing with conventional AlN/diamond hetero-structures, the inclusion of ZnO as the intermediate layer provides with an excellent electromechanical coupling factor which significantly improves the $$ (11\bar{2}0) - [0001] $$ structure. However, comparing with the ZnO/diamond hetero-structure, a high phase velocity (Vph) was observed. Therefore, the development of a well-balanced structure that maximizes the values of Vph and K2 is systematically challenging. Moreover, it was found that initial stresses have a significant effect on the Rayleigh wave velocities. Fundamental A0 Lamb mode can be generated in piezoelectric hetero-structures when the properties of substrate remain very low relative to the film. Numerical results obtained in this paper can provide a deeper insight into the nature of the Rayleigh wave behaviors in piezoelectric hetero-structures, involving a ZnO intermediate layer.

Integration of diamond-like carbon and AlN for acoustic wave devices

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Surface acoustic wave resonators based on (002)AlN/Pt/diamond/silicon layered structure

Surface acoustic wave characteristics on an AlN/LiNbO_3/diamond layered structure

Flexible Surface Acoustic Wave Device with Aln Film on Polymer Substrate

Preparation, Characterization, and Application of AlN/ScAlN Composite Thin Films

Substrate Removal Structures for AlScN/diamond Surface Acoustic Wave Resonators

Characterization of Nanomechanical and Piezoelectric Properties of Aln Thin Film for Thin Film Bulk Acoustic Wave Resonators

Influence of a Piezoelectric ZnO Intermediate Layer on Rayleigh Waves Propagating in Sc 43% AlN 57% /zno/diamond Hetero-Structures Subjected to Uniaxial Stress

The Characterization of Surface Acoustic Wave Devices Based on AlN-Metal Structures.

Theoretical investigation of surface acoustic wave in the new, three-layered structure: ZnO/AlN/diamond

AlN Piezoelectric Thin Films for Energy Harvesting and Acoustic Devices

Enhanced Performance of 17.7 GHz SAW Devices Based on AlN/diamond/Si Layered Structure with Embedded Nanotransducer

Diamond deposition on AlN using Q-carbon interlayer through overcoming the substrate limitations

Characterization of Mechanical and Piezoelectric Properties of the AlN Thin Film in a Composite Resonator Stuctrue

Growth and Characterization of Polyimide-Supported AlN Films for Flexible Surface Acoustic Wave Devices

High Performance AlScN Thin Film Based Surface Acoustic Wave Devices with Large Electromechanical Coupling Coefficient

Studies on a novel structure of ZnO/AlN/ diamond for SAW device applications

Fabrication and characterization of hybrid bulk and surface acoustic wave resonators with Ag/patterned-AlN/Mo/diamond/Si layered structure

Theoretical Investigation of Acoustic Wave Devices Based on Different Piezoelectric Films Deposited on Silicon Carbide

Pulsed-laser deposition of piezoelectric-coefficient modulated multilayered films ZnO/Al2O3 on silicon and their enhanced acoustic resonance