Abstract:To date, most surface acoustic wave (SAW) devices have been made from bulk piezoelectric materials, such as quartz, lithium niobate or lithium tantalite. These bulk materials are brittle, less easily integrated with electronics for control and signal processing, and difficult to realize multiple wave modes or apply complex electrode designs. Using thin film SAWs makes it convenient to integrate microelectronics and multiple sensing or microfluidics techniques into a lab-on-a-chip with low cost and multi-functions on various substrates (silicon, glass or polymer). In the work, aluminum nitride (AlN)-based SAW devices were fabricated and characterized for discrete microfluidic (or droplet based) applications. AlN films with a highly c -axis texture were deposited on silicon substrates using a magnetron sputtering system. The fabricated AlN/Si SAW devices had a Rayleigh wave mode at a frequency of 80.3 MHz (with an electromechanical coupling coefficient k 2 of 0.24 % and phase velocity v p of 5,139 m/s) and a higher-frequency-guided wave mode at 157.3 MHz (with a k 2 value of 0.22 % and v p of 10,067 m/s). Both modes present a large out of band rejection of ~15 dB and were successfully applied for microfluidic manipulation of liquid droplets, including internal streaming, pumping and jetting/nebulization, and their performance differences for microfluidic functions were discussed. A detailed investigation of the influences of droplet size (ranging from 3 to 15 μL) and RF input power (0.25–68 W) on microdroplet behavior has been conducted. Results showed that pumping and jetting velocities were increased with an increase of RF power or a decrease in droplet size.

Flexible Surface Acoustic Wave Device with Aln Film on Polymer Substrate

Growth and Characterization of Polyimide-Supported AlN Films for Flexible Surface Acoustic Wave Devices

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive DC magnetron sputtering

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive direct-current magnetron sputtering

Preparation of Aln Thin Films for Film Bulk Acoustic Resonator Application by Radio Frequency Sputtering

Flexible thin-film acoustic wave devices with off-axis bending characteristics for multisensing applications

Flexible structured high-frequency film bulk acoustic resonator for flexible wireless electronics

Wafer-Scale Flexible Surface Acoustic Wave Devices Based on an Aln/Si Structure

Flexible Surface Acoustic Wave Devices and Its Applications in Microfluidics

Flexible and Transparent Aluminum‐Nitride‐Based Surface‐Acoustic‐Wave Device on Polymeric Polyethylene Naphthalate

Discrete Microfluidics Based on Aluminum Nitride Surface Acoustic Wave Devices

Integration of diamond-like carbon and AlN for acoustic wave devices

Flexible surface acoustic wave resonators built on disposable plastic film for electronics and lab-on-a-chip applications

Recent Progress in Polymeric Flexible Surface Acoustic Wave Devices: Materials, Processing, and Applications

Acoustofluidic Waveguides for Fabrication of Localized Polymeric Microstructure Arrays

Surface acoustic wave devices fabricated on epitaxial AlN film

Integrated sensing and acoustofluidic functions for flexible thin film acoustic wave devices based on metallic and polymer multilayers

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Characterisation of Aluminium Nitride Films and Surface Acoustic Wave Devices for Microfluidic Applications

Integrated Piezoelectric AlN Thin Film with SU-8/PDMS Supporting Layer for Flexible Sensor Array