Abstract:For a large circuit under test (CUT), it is likely that some test patterns result in excessive power dissipations that exceed the CUT's power rating. Designers may resort to low-power automatic test pattern generation (ATPG) tools to solve this problem, which, however, usually leads to larger test data volume and requires extra computational effort, even if such tools are available. Another method is to partition the circuit into multiple subcircuits and test them separately. Unfortunately, this usually involves rerunning the time-consuming ATPG for each partitioned subcircuit and solving the problem of how to achieve an acceptable fault coverage for the glue logic between subcircuits. In this paper, we propose a novel low-power virtual test partitioning technique without the above-mentioned shortcomings. The basic idea is to partition the circuit in such way that the faults in the glue logic between subcircuits can be detected by patterns with low power dissipation that are applied at the entire circuit level, while the patterns with high power dissipation can be applied within a partitioned subcircuit without loss of fault coverage. Scan chain routing cost has also been considered during the partitioning process. Experimental results show that the proposed technique is very effective in reducing test power.

An Improved Scan Design For Minimization Of Test Power Under Routing Constraint

A Cross-Layer Approach for Early-Stage Power Grid Design and Optimization.

Low-Power Scan Testing for Test Data Compression Using a Routing-Driven Scan Architecture

A Novel Scan Segmentation Design for Power Controllability and Reduction in At-Speed Test.

Early-Stage Power Grid Design

Early-Stage Power Grid Design: Extraction, Modeling and Optimization

A Fast OPC Algorithm for IC Layout Based on 1-D Cells after Optimization of Gap Distribution

Low-power Technique of Scan-Based Design for Test

A scan chain optimization method for diagnosis

A Power-Effective Scan Architecture Using Scan Flip-Flops Clustering And Post-Generation Filling

A Scan Segmentation Architecture for Power Controllability and Reduction

A low power architecture based on unidirectional cut

A Unified Solution to Scan Test Volume, Time, and Power Minimization

A Power Efficient BIST TPG Method on Don't Care Bit Based 2-D Adjusting and Hamming Distance Based 2-D Reordering

A Cost-Effective Scan Architecture for Scan Testing with Nonscan Test Power and Test Application Cost

Reduction of test power and data volume in BIST scheme based on scan slice overlapping

Improve Test Compression Ratio and Reduce Test Power of EFDR Codes by Scan Chain Reconfiguration

Localizing Test Power Consumption for Scan Testing

Power Management during Scan Based Sequential Circuit Testing

Complex Networks Clustering for Lower Power Scan Segmentation in At-Speed Testing.

Pattern-directed Circuit Virtual Partitioning for Test Power Reduction