Abstract:Developing high strength and tough silicon carbide (SiC) composite ceramics remains a significant challenge. Here, we report the process of synthesizing fully densified SiC/C composite ceramics using SiC@graphene (SiC@G) core–shell nanoparticles as raw materials through spark plasma sintering (SPS) at 1700°C and 45 MPa. The SiC@G nanoparticles were synthesized by the fluidized bed chemical vapor deposition (FB‐CVD) method. During the sintering process, graphene coated, the surface of nanosized SiC particles exhibited high electrical and thermal conductivity, facilitating the uniform distribution of pulse current and heat and promoting the densification of SiC/C composite ceramics. For the prepared SiC/C composite ceramic, the carbon content reaches as high as 14.3 wt%, with carbon uniformly dispersed in a particulate form within the SiC matrix and stable interface bonding. Consequently, the introduction of excessive carbon does not compromise the hardness (28.8 GPa) and flexural strength (517.34 MPa) of the SiC/C composite ceramics. Furthermore, the carbon particles effectively enhance the toughness of the SiC/C composite material through mechanisms such as crack branching, bridging, and deflection, resulting in a fracture toughness of 7.38 MPa m1/2. The preparation strategy in this study provides a novel route for sintering SiC composites with high‐carbon content through nanoscale powder structure design, resulting in the attainment of high‐performance lightweight composite materials.

Chemical Vapor Deposition Synthesis Carbon Nanosheet–Coated Zirconium Diboride Particles for Improved Fracture Toughness

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Zirconia-based Nanocomposite Toughened by Functionalized Multi-Wall Carbon Nanotubes

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Processing and Mechanical Properties of Short Carbon Fibers Toughened Zirconium Diboride-Based Ceramics

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Enhanced Toughness Of Zirconia Ceramics With Graphene Platelets Consolidated By Spark Plasma Sintering

Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Toughening mechanism of in-situ synthesized ZrB2 based composite coating by plasma spraying

Graphite nanoplatelets toughened zirconium carbide ceramics prepared by spark plasma sintering

SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms

A novel method for fabricating brick-mortar structured alumina-zirconia ceramics with high toughness

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics