Abstract:Silicon carbide ceramics are important engineering materials, but their application is limited by the inherent brittleness. Two-dimensional graphene, with its excellent properties, can be used as a second phase to improve the performance of silicon carbide ceramics. However, due to poor dispersion of graphene in the ceramic matrix, it is a challenge to fully exploit the modifying effect of graphene in composite materials. To address these challenges, SiC-based ceramic materials incorporating graphene nanosheets (GNPs) were synthesized using ceramic organic precursor polycarbosilane and industrial expandable graphite as starting materials. The precursor intercalation technique was employed to fabricate SiC/GNPs ceramic composites with GNPs volume fraction of 1%, 3%, and 5%. The GNPs were uniformly arranged in an array-like parallel fashion in the SiC ceramic matrix, showing excellent orientation. With the GNPs content increasing, the spacing between GNPs within the array decreased, indicating tunable microstructural topology. The addition of GNPs greatly enhanced the fracture toughness of SiC ceramics. When the GNPs content was 3%, the relative density of the samples reached 98.5%, the bending strength reached 445 MPa, and the fracture toughness (KIC value) peaked at 5.67 MPa center dot m(1/2), surpassing pure SiC ceramics by 40%, which was primarily attributed to crack deflection and bridging induced by the GNPs. However, further increase in GNPs content led to a decrease in fracture toughness to 4.37 MPa center dot m(1/2). These SiC-based ceramic composites with a graphene array have potential application in design and development of novel "structure-function integration" SiC-based ceramic devices.

Graphite nanoplatelets toughened zirconium carbide ceramics prepared by spark plasma sintering

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

Enhanced Toughness Of Zirconia Ceramics With Graphene Platelets Consolidated By Spark Plasma Sintering

Improved fracture resistance and toughening mechanisms of GNPs reinforced ceramic composites

Microstructure and fracture toughness of SiAlCN ceramics toughened by SiCw or GNPs

Zirconia-based Nanocomposite Toughened by Functionalized Multi-Wall Carbon Nanotubes

SiC-based Ceramic Materials Incorporating GNPs Array:Preparation and Mechanical Characterization

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC

Mechanical and Tribological Properties of SiC-GNPs Composites Prepared by Oscillatory Pressure Sintering

Toughening and ablation mechanism of Si3N4 short fiber toughened ZrB2-based ceramics

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

High toughness and R-curve behaviour of laminated SiC/graphite ceramics

Assessing fracture toughness in sintered Al2O3–ZrO2(3Y)–SiC ceramic composites through indentation technique

The toughening mechanism and mechanical properties of graphene-reinforced zirconia ceramics by microwave sintering

Processing and Mechanical Properties of Short Carbon Fibers Toughened Zirconium Diboride-Based Ceramics

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Toughening effect of multiwall carbon nanotubes on 3Y-TZP zirconia ceramics at cryogenic temperatures

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Microstructure and mechanical properties of dense ZTA ceramics with high Cr2O3 solution

Preparation and properties of Ti(C,N)-based cermets with graphene nanosheet addition by spark plasma sintering