Abstract:Silicon carbide ceramics are important engineering materials, but their application is limited by the inherent brittleness. Two-dimensional graphene, with its excellent properties, can be used as a second phase to improve the performance of silicon carbide ceramics. However, due to poor dispersion of graphene in the ceramic matrix, it is a challenge to fully exploit the modifying effect of graphene in composite materials. To address these challenges, SiC-based ceramic materials incorporating graphene nanosheets (GNPs) were synthesized using ceramic organic precursor polycarbosilane and industrial expandable graphite as starting materials. The precursor intercalation technique was employed to fabricate SiC/GNPs ceramic composites with GNPs volume fraction of 1%, 3%, and 5%. The GNPs were uniformly arranged in an array-like parallel fashion in the SiC ceramic matrix, showing excellent orientation. With the GNPs content increasing, the spacing between GNPs within the array decreased, indicating tunable microstructural topology. The addition of GNPs greatly enhanced the fracture toughness of SiC ceramics. When the GNPs content was 3%, the relative density of the samples reached 98.5%, the bending strength reached 445 MPa, and the fracture toughness (KIC value) peaked at 5.67 MPa center dot m(1/2), surpassing pure SiC ceramics by 40%, which was primarily attributed to crack deflection and bridging induced by the GNPs. However, further increase in GNPs content led to a decrease in fracture toughness to 4.37 MPa center dot m(1/2). These SiC-based ceramic composites with a graphene array have potential application in design and development of novel "structure-function integration" SiC-based ceramic devices.

Microstructure and fracture toughness of SiAlCN ceramics toughened by SiCw or GNPs

Toughening Mechanism and Oxidation Resistance of SiC Whisker-Toughened SiAlCN Ceramics

Spark plasma sintering and toughening of graphene platelets reinforced SiBCN nanocomposites

Microstructure and Toughening Mechanisms of Al2O3/(W, Ti)C/graphene Composite Ceramic Tool Material

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

SiC-based Ceramic Materials Incorporating GNPs Array:Preparation and Mechanical Characterization

Graphite nanoplatelets toughened zirconium carbide ceramics prepared by spark plasma sintering

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Microstructure and Mechanical Properties of SiC-GNPS-SiCW Ceramics by Oscillatory Pressure Sintering

The Effect of Microstructure on Fracture Toughness for Silicon Nitride Ceramics

Mechanical Properties and Toughening Mechanisms of Ceramic Composites

Effect of Graphene on Microstructure and Mechanical Properties of Si3N4/SiC Ceramics

Significant improvements of the relative density, microhardness, and fracture toughness of SiC via the addition of Ni3Al and Mg2Si

Improved toughness of ZrB2–SiC composites with nanopowders obtained by mechanical alloying

Effect of SiC nanoparticle on microstructure and mechanical properties of graphene nanosheet (GNS) reinforced aluminum composites

Improved fracture resistance and toughening mechanisms of GNPs reinforced ceramic composites

Preparation and characterization of medium entropy alloy CrCoNi toughened SiC ceramics

Study on the mechanical properties and microstructure of Al2O3/nano-SiC multiphase ceramics

Microstructure and Properties of a Graphene Platelets Toughened Boron Carbide Composite Ceramic by Spark Plasma Sintering

Mechanical and Tribological Properties of SiC-GNPs Composites Prepared by Oscillatory Pressure Sintering