Abstract:Underground pipelines are vital parts to urban water supply, gas supply, and other lifeline systems, affecting the sustainable development of cities to a great extent. The pipeline joint, which is a weak link, may be seriously damaged during natural disasters such as earthquakes. The failure of pipe joints can cause leakage accidents, resulting in system failure and interruption, and even some secondary disasters. Herein, based on uniaxial and plane tensile test results of a T-rubber gasket material, the assembly process and sealing performance of a T-rubber gasket joint of a ductile iron pipe are numerically simulated using the Ogden third-order strain energy density function to fit the material constant. The simulation accounts for severe nonlinearities, including large deformations, hyperelasticity, and complex contacts. The effects of the assembly friction coefficient, assembly depth, and radial clearance deviation of the socket and spigot on the seal contact pressure are analyzed. The results suggest that the entire history of the deformation and stress variations during assembly can be clearly visualized and accurately calculated. For the different friction coefficients, the assembly depth corresponding to the sliding friction condition of the spigot pipe was 74 mm, while the minimum pushing force required to assemble the T-rubber gasket joint of a DN300 ductile iron pipe was 6.8 kN at the ideal situation with a friction coefficient of 0. The effective contact pressure of the rubber gasket seepage surface under various operating conditions is much higher than the normal pressure of municipal pipelines, thus indicating that the rubber gasket joint exhibits the ideal sealing performance. Furthermore, a certain deviation, which is about 20 mm, is allowed for the assembly depth of the rubber gasket joint such that the axial displacement of the pipe joint can be adapted under an earthquake or ground displacement.

Transverse impact characteristics of a rubber pipe expansion joint

A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Experimental study of the static behavior of tubular N-joints

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Numerical and Experimental Study on Balanced Performance and Axial Stiffness of Fiber-Reinforced Rubber Pipe

An Experimental Study on the Mechanical Capability of A Rubber Gasket Joint in A Ductile Cast Iron Pipeline under Stretch-Bending

Analysis on Sealing Performance for a New Type of Rubber Olecranon-Shaped Sealing Ring in Pipe Jacking Joint

Dynamic Response of Pressurized Gas Pipes Subjected to Transverse Impact Loads

Numerical Simulation of Assembly Process and Sealing Reliability of T-Rubber Gasket Pipe Joints

FE Simulation for Assembling Rubber-Gasket Pipe Joints

Site-based Experimental Study on Pipe Behavior During Pipe Jacking

Experimental research on ductile iron pipes with rubber gasketed joints

Experimental and numerical study on the dynamic behavior of concrete-filled double steel tubular T-joint under impact loading

Shear mechanical response and deformation failure of F-type socket joint in a rectangular pipe jacking tunnel under different geologic conditions

Experimental study on dynamic compression behavior characteristics and stress wave propagation law of rigid-flexible combinations under cyclic bi-directional impact loading

Axial mechanical experiments of unbonded flexible pipes

Finite Element Simulations of Working Characteristics of Solid Expandable Tubular Threaded Joint

Study on the Mechanical Properties of Rubber Gasketed Joints in Segmented Pipeline

Experimental and thermal‐structure coupling analysis for oil and water‐swellable packer