Abstract:When a vehicle passes over a bridge, it may jump on the bridge due to a damaged expansion joint. The sudden jump induces a heavy dynamic impact on the bridge and therefore damages the bridge deck and girder. The traditional dynamic amplification factor defined by the current bridge design code shows the amplification of the static effects on the bridge. However, it only concerns the stable moving load induced by the vehicle. The sudden vehicle impact due to a damaged expansion joint sometimes exceeds the allowable design load, so it is important to evaluate the dynamic impact in practice. In fact, the dynamic impact can be approximately considered as a contact force between a damped harmonic oscillator and a beam due to the bilateral symmetry of the vehicle; therefore, a model-based approach using the bridge midspan acceleration is proposed in this study to approximately evaluate the impact force, where it is assumed as an exponentially damped sine function. This is a typical parametric model-based inverse problem. The conjugate direction method is used to determine the unknown parameters and the initial values are determined by a simple global search method. Since only five parameters are included, the proposed method is simpler than the conventional basis function-based methods. Numerical simulations were conducted to validate the proposed method. Generally, the proposed method performs well to identify the dynamic impact. In particular, the displacement measured directly from the bridge is preferred since the displacement obtained from the acceleration has numerical errors; the measurement noise in the range of 1% to 5% shows a slight influence on the proposed method; and the error of frequencies and mode shapes greatly affects the proposed method, especially for the maximum force.

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors

Study on low-frequency noise radiated from steel multi-box girder bridge induced by traffic vibration

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Assessment of Sound Pressure of Transient Noise Radiated from Vehicle-Bridge Coupling Vibration

An analysis method of vehicle–bridge coupling vibration considering effects of expansion joint parameters and its application

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

Dynamic Response of a Vehicle-Bridge Expansion Joint Coupled System

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

Dynamic performance of a concrete-filled steel tube high-pier curved continuous truss girder bridge due to moving vehicles

Vehicle–Bridge Interaction Dynamic Analysis of Continuous Rigid Frame Composite Box Girder Bridge with Corrugated Steel Webs under Seismic Excitation

Failure Mechanism of Expansion Joints in a Suspension Bridge

Evaluation of the Dynamic Impact of a Passing Vehicle on a Bridge Deck Due to a Damaged Expansion Joint