Abstract:Assembly construction is the main feature of industrialized bridges, and π-shaped section steel–concrete composites that are continuously rigid have been widely used in engineering fields in recent years; however, their dynamic responses and corresponding impact coefficients in positive and negative moment regions need to be further studied. First, considering the interface slip model, we established a finite element model for the π-shaped continuous region section of the steel–concrete composite on the Sutai Expressway Tongfu No. 3 viaduct. Second, the bridge deck unevenness parameters were generated by preparing a MATLAB program with random calculations and were added to the bridge deck as the excitation load along with the vehicle load. Such parameters are defined on the basis of considering the vertical degrees of freedom of the four wheels and of one vehicle rigid body. Finally, we analyzed the displacement or stress impact coefficients as the dynamic response index of the bridge by adjusting the vehicle travel speeds, vehicle weights, interface slip stiffness values, and deck unevenness values. The results show that the change in vehicle travel speed and the change in vehicle load weight have some influence on the change in the dynamic effect of the combined beam, but this change is not significant. Moreover, the unevenness and interface slip strength changes have a large effect on the dynamic effect of the combination beam, which can significantly change the impact coefficient of the combination beam bridge. The worse the unevenness of the bridge deck is, the lower the grade of interface slip for the steel–concrete composite bridges and the higher the impact coefficient. We calculated the recommended impact coefficient values of the steel–concrete composite bridge based on the specifications for various countries, and they range from 1.16 to 1.4; such values are similar to the finite element calculation results.

Dynamic performance of a concrete-filled steel tube high-pier curved continuous truss girder bridge due to moving vehicles

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Numerical Investigation on the Dynamic Performance of Steel–Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Dynamic Behaviour of Bridge Girders with Trapezoidal Profiled Webs Subjected to Moving Loads

Dynamic Reliability of Continuous Rigid-Frame Bridges under Stochastic Moving Vehicle Loads

Study on the Dynamic Response of Composite Box Girder Bridges with Corrugated Steel Webs

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Structural Performance Evaluation of A Steel-Plate Girder Bridge Using Ambient Acceleration Measurements

Rigid–flexible coupled dynamic response of steel–concrete bridges on expressways considering vehicle–road–bridge interaction