Abstract:To study the standardized evaluation method of vibration comfort of pedestrian bridges, the effect of the transient response term is ignored based on the generalized single degree of freedom (SDOF) method with reference to the American Institution of Steel Construction inc (AISC 11) specification. The resonance conditions between the crowd and the bridge structure are also considered, and the pedestrian bridge structure is simplified to an SDOF system. Then, the peak acceleration of the structure under crowd excitation is directly calculated using the generalized crowd load, and the comfort evaluation is carried out according to the German EN03 code and the Chinese code. For a new pedestrian bridge with hinged piers, human-induced vibration tests were carried out to obtain the structural acceleration time response data under various crowd load excitation conditions, and the acceleration values calculated with the numerical simulation method, the frequency response function method, the generalized SDOF method, and the proposed method were compared with field measurements. The results show that for the normal excitation condition with a crowd density less than or equal to 0.2 person/m2, the acceleration maximum error for the proposed method is between 4.22% and 13.28%. The error is only 6.35% compared with the finite element simulation results. The method can derive peak acceleration by performing only modal tests, eliminating errors caused by different testers and errors due to deflection measurements. It saves considerable time cost and economic cost, and improves the speed of pedestrian bridge comfort evaluation. Therefore, the method proposed for the first time in this study can accurately assess the human-caused vibration comfort of pedestrian bridges with articulated piers. Although the hinged-pier and column steel pedestrian bridge meets the code requirement of a vertical first-order frequency greater than 3 Hz, it is recommended to add TMD vibration damping measures to the bridge in order to improve pedestrian comfort.

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Calculation method for human-bridge vertically coupled vibration

Quantification of Pedestrian's Comfort Level and Dynamic Properties of Footbridge Vibration Based on In-Situ Measurement

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Research on Vehicle-Induced Vibration of Pedestrian Bridge and Its Application in Comfort Evaluation

Evaluation of Pedestrian Comfort for a Footbridge with Hinged Piers

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Vibration Measurement and Analysis of Large Span Footbridge

Vibration Serviceability Assessment of Pedestrian Bridges Based on Comfort Level

Vibration Response Analysis of Long-Span Footbridge to Random Walking Loads Generated by Crowds

Analysis and improvement of human-induced vibration comfort of articulated steel pedestrian bridges

RMS acceleration response spectrum method of large-span footbridge under pedestrian excitation

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Dynamic performance of a concrete-filled steel tube high-pier curved continuous truss girder bridge due to moving vehicles

VIBRATION STUDY ON FRP FOOTBRIDGE UNDER HUMAN-INDUCED LOAD