Abstract:To study the standardized evaluation method of vibration comfort of pedestrian bridges, the effect of the transient response term is ignored based on the generalized single degree of freedom (SDOF) method with reference to the American Institution of Steel Construction inc (AISC 11) specification. The resonance conditions between the crowd and the bridge structure are also considered, and the pedestrian bridge structure is simplified to an SDOF system. Then, the peak acceleration of the structure under crowd excitation is directly calculated using the generalized crowd load, and the comfort evaluation is carried out according to the German EN03 code and the Chinese code. For a new pedestrian bridge with hinged piers, human-induced vibration tests were carried out to obtain the structural acceleration time response data under various crowd load excitation conditions, and the acceleration values calculated with the numerical simulation method, the frequency response function method, the generalized SDOF method, and the proposed method were compared with field measurements. The results show that for the normal excitation condition with a crowd density less than or equal to 0.2 person/m2, the acceleration maximum error for the proposed method is between 4.22% and 13.28%. The error is only 6.35% compared with the finite element simulation results. The method can derive peak acceleration by performing only modal tests, eliminating errors caused by different testers and errors due to deflection measurements. It saves considerable time cost and economic cost, and improves the speed of pedestrian bridge comfort evaluation. Therefore, the method proposed for the first time in this study can accurately assess the human-caused vibration comfort of pedestrian bridges with articulated piers. Although the hinged-pier and column steel pedestrian bridge meets the code requirement of a vertical first-order frequency greater than 3 Hz, it is recommended to add TMD vibration damping measures to the bridge in order to improve pedestrian comfort.

RMS acceleration response spectrum method of large-span footbridge under pedestrian excitation

RMS acceleration response spectrum method of multi-span footbridge under pedestrian excitation

Probability Distribution of Footbridge Peak Acceleration to Single and Multiple Crossing Walkers

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

Deterministic and Probabilistic Serviceability Assessment of Footbridge Vibrations Due to a Single Walker Crossing

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

RMS Acceleration Response Spectrum Method for Single-Span Footbridges under Pedestrian Load

Design of Footbridges Against Pedestrian-Induced Vibrations

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

Calculation method for human-bridge vertically coupled vibration

Vibration Response Analysis of Long-Span Footbridge to Random Walking Loads Generated by Crowds

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Analysis of Response Spectrum for Random Pedestrian Loads

Quantification of Pedestrian's Comfort Level and Dynamic Properties of Footbridge Vibration Based on In-Situ Measurement

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Vibration Measurement and Analysis of Large Span Footbridge

Experimental Investigation on Pedestrian Walking Load in Steel Footbridges

Evaluation of Pedestrian Comfort for a Footbridge with Hinged Piers

Human-induced loading and dynamic response of footbridges in the vertical direction due to restricted pedestrian traffic

Research on Vehicle-Induced Vibration of Pedestrian Bridge and Its Application in Comfort Evaluation