Abstract:To study the standardized evaluation method of vibration comfort of pedestrian bridges, the effect of the transient response term is ignored based on the generalized single degree of freedom (SDOF) method with reference to the American Institution of Steel Construction inc (AISC 11) specification. The resonance conditions between the crowd and the bridge structure are also considered, and the pedestrian bridge structure is simplified to an SDOF system. Then, the peak acceleration of the structure under crowd excitation is directly calculated using the generalized crowd load, and the comfort evaluation is carried out according to the German EN03 code and the Chinese code. For a new pedestrian bridge with hinged piers, human-induced vibration tests were carried out to obtain the structural acceleration time response data under various crowd load excitation conditions, and the acceleration values calculated with the numerical simulation method, the frequency response function method, the generalized SDOF method, and the proposed method were compared with field measurements. The results show that for the normal excitation condition with a crowd density less than or equal to 0.2 person/m2, the acceleration maximum error for the proposed method is between 4.22% and 13.28%. The error is only 6.35% compared with the finite element simulation results. The method can derive peak acceleration by performing only modal tests, eliminating errors caused by different testers and errors due to deflection measurements. It saves considerable time cost and economic cost, and improves the speed of pedestrian bridge comfort evaluation. Therefore, the method proposed for the first time in this study can accurately assess the human-caused vibration comfort of pedestrian bridges with articulated piers. Although the hinged-pier and column steel pedestrian bridge meets the code requirement of a vertical first-order frequency greater than 3 Hz, it is recommended to add TMD vibration damping measures to the bridge in order to improve pedestrian comfort.

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

Study on low-frequency noise radiated from steel multi-box girder bridge induced by traffic vibration

Analysis of dynamic load of vehicle bumping at bridge-head using distributed spring-damper element

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Theoretical analysis of low-frequency noise radiated from bridge vibrations

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Calculation method for human-bridge vertically coupled vibration

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Research on Vehicle-Induced Vibration of Pedestrian Bridge and Its Application in Comfort Evaluation

Quantification of Pedestrian's Comfort Level and Dynamic Properties of Footbridge Vibration Based on In-Situ Measurement

VIBRATION STUDY ON FRP FOOTBRIDGE UNDER HUMAN-INDUCED LOAD

Vibration Response Analysis of Long-Span Footbridge to Random Walking Loads Generated by Crowds

Vibration Measurement and Analysis of Large Span Footbridge

Analysis and improvement of human-induced vibration comfort of articulated steel pedestrian bridges

RMS acceleration response spectrum method of large-span footbridge under pedestrian excitation

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Evaluation of Pedestrian Comfort for a Footbridge with Hinged Piers

Fatigue Evaluation of CFST Arch Bridge Based on Vehicle–Bridge Coupling Vibration Analysis