Abstract:Vehicle or pedestrian loads can cause bridge vibration. The pedestrian load is essentially a stochastic process, and the vibration response of pedestrian bridges is also a stochastic process. In order to evaluate the human comfort of a pedestrian bridge comprehensively, this paper presents a comfort evaluation method based on stochastic process theory. The autocorrelation function of the displacement response of a pedestrian bridge under random pedestrian load is derived in this paper. On this basis, the root mean square (RMS) of acceleration is proposed as the comfort evaluation index. Taking an asymmetric single-tower cable-stayed bridge as an example, the modal analysis of the bridge is proceeded by finite element method (FEM). Then the acceleration time histories of four measuring points are obtained by fi eld experiment. FEM results and fi eld experiment results are used to analyserandom vibration of the bridge. Through a fi eld experiment and random vibration analysis of the bridge, the acceleration peak value evaluation index and the RMS of acceleration value evaluation index are compared. The results show that the RMS of acceleration index is more comprehensive and reasonable because it considers the whole-time history of the vibration response. The RMS of acceleration index is based on stochastic process theory, so it is more rigorous in mathematical expressionand clearer in physical concept. It providesa reference for the evaluation of pedestrian bridge comfort. Published on 2020-12-01 00:00:00

Research on Vehicle-Induced Vibration of Pedestrian Bridge and Its Application in Comfort Evaluation

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Study on low-frequency noise radiated from steel multi-box girder bridge induced by traffic vibration

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Design of Footbridges Against Pedestrian-Induced Vibrations

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Probability Distribution of Footbridge Peak Acceleration to Single and Multiple Crossing Walkers

Assessment of Sound Pressure of Transient Noise Radiated from Vehicle-Bridge Coupling Vibration

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Theoretical analysis of low-frequency noise radiated from bridge vibrations

Calculation method for human-bridge vertically coupled vibration

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Quantification of Pedestrian's Comfort Level and Dynamic Properties of Footbridge Vibration Based on In-Situ Measurement

Vibration Serviceability Assessment of Pedestrian Bridges Based on Comfort Level

Evaluation of Pedestrian Comfort for a Footbridge with Hinged Piers

Comfort evaluation of bridge based on stochastic process theory

RMS acceleration response spectrum method of large-span footbridge under pedestrian excitation

Analysis and improvement of human-induced vibration comfort of articulated steel pedestrian bridges