Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Research on Rational Post Successive Prestress Tension Sequence of Simply Supported and Continuous Box Girder Bridge

Static Characteristic Analysis of Long Span Continuous Curved Steel Box Girder Bridge

Study on the Effect of Middle Diaphragm on Ultimate Loading Capacity of Multi-Box Girder Bridges

Load Test Analysis and Research on Long-Span Concrete Continuous Rigid Frame Bridge

Numerical Study on Static Aerodynamic Coefficients Aerodynamic Interference Effects of the Box girder Section of Continuous Rigid Frame Bridge with Close Twin Deck

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Dynamic Characteristics and Multi-support Seismic Response Analysis of a Super-large-span Suspension Bridge

Dynamic performance of a concrete-filled steel tube high-pier curved continuous truss girder bridge due to moving vehicles

Static and dynamic load test on concrete hollow-core slab bridge

Bearing capacity analysis of a curvilinear box girder landscape bridge