Abstract:The engagement surface of the threaded connection of Oil Country Tubular Goods (OCTG) is a complex helical surface. The stress analysis of the threaded connection involves material nonlinearity, geometric nonlinearity and contact nonlinearity. It is difficult to obtain an analytical solution and the finite element method (FEM) is a powerful numerical method for solving the problem of threaded connection. Due to the complexity of three-dimensional modeling and the difficulty of computational convergence, researchers usually use two-dimensional axisymmetric finite element models to analyze the characteristic of threaded connection. However, twodimensional axisymmetric model can not efficiently simulate the stress characteristics of the threaded connection with make-up torque, which has greatly influence on the reliability of the connection, and it can not reflect the real stress state of the threaded connection. In this paper, an explicit dynamic FEM is employed and the nonlinear contact theory, nonlinear elastic-plastic stress-strain relationships and the von Mises yield criterion are considered to analyze the stress distribution of the threaded connection. As examples, three-dimensional elasto-plastic finite element models of bypass valve and drill pipe threaded connection are established. Mechanical characteristics of the threaded connections are analyzed, in which the make-up torque, axial loads and working torque are comparable with the real working conditions. It is found that the pin of bypass valve threaded connection shows a high stress and is broken when the working torque exceeds 22992.8 N center dot m. Meanwhile, drill pipe threaded connection is reliable under the most demanding load. Analysis results presented in this paper are consistent with the field observation.

Finite Element Simulations of Working Characteristics of Solid Expandable Tubular Threaded Joint

Finite Element Simulations of Mechanical Properties of Solid Expandable Tubular Threaded Joint

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Analysis of expansion performance and parameter sensitivity of solid expandable tubular with thread joint

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Solid expandable tubular forming behavior based on twin shear stress yield criterion: Analytical, numerical simulation and experiment

A special thread design for failure prevention of expandable casing

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Multi-scale Elastoplastic Mechanical Model and Microstructure Damage Analysis of Solid Expandable Tubular*

Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model

Experimental study and FEM analysis on mechanical behavior of a steel tubular joint with bolted connection subject to biaxial compression

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

EXPERIMENTAL STUDY OF THE BEARING CAPACITY OF INTERNAL|EXTERNAL FLANGE JOINTS SUBJECTED TO PRESSURE AND BENDING LOADINGS WITH VARIOUS ECCENTRICITIES

Theoretical Analysis and Numerical Simulation on the Hydraulic Expansion of Double-Layered Tubes

NONLINEAR FINITE ELEMENT ANALYSIS FOR THE ULTIMATE STRENGTH OF MULTIPLANNAR TUBULAR JOINT

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

An Assessment of Seal Ability of Tubing Threaded Connections: A Hybrid Empirical-Numerical Method

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

Influence of mechanical properties of tube on forming limits and deformation characteristics in expansion drawing process