Abstract:This paper reports on a novel process for preparing open-cell polymer foams which consists in (1) blending a desired polymer with one which is much more CO2-philic and which is the dispersed phase, (2) tuning the sea-island type of morphology of the polymer blend to a co-continuous type by selectively swelling the CO2-philic polymer with CO2 saturation, and (3) selectively foaming the CO2-philic polymer by CO2 depressurization. More specifically, a blend composed of 70% of isotactic polypropylene (PP) and 30% of a copolymer of ethylene-propylene-diene monomer (EPDM) is chosen to show the working principle and potential of the above process. PP is a desired polymer and EPDM a CO2-philic one. During the CO2 saturation, the initially sea-island type of morphology of the PP/EPDM (70/30) blend evolves into a more or less co-continuous one due to the much more CO2-philic nature of the EPDM. Upon CO2 depressurization, foaming takes place primarily in the EPDM phase, leading to open cells. To achieve open-cells for the PP/EPDM (70/30) blend, it is necessary to search for an optimum CO2 saturation pressure and temperature window. Within this window, the cell size and the expansion ratio are in the range of 1.5-17.5 mu m and 1.5-6.6, respectively. Tensile results show that the elongation at break of the CO2 saturated and foamed PP/EPDM blends is higher than that of the un-treated one, indicating that the co-continuous morphology of the PP/EPDM blend improves its toughness. Moreover, compression results indicate that the open-cell foams exhibit good flexibility and elasticity. (C) 2016 Elsevier Ltd. All rights reserved.

The Study on Open-Celled Morphology of Polymer Blends in Vibration

Effect of Melt Viscosity on the Cell Morphology and Properties of Poly(lactic Acid) Foams

Study of Vibration Field on Microcellular Foaming in Nucleating Agents

MICROSTRUCTURES AND THEIR VARIATION MECHANISM OF A KIND OF POLYBLENDS FOR CEMEN TCONCRETE

Inner Voids of Octavinyl Polyhedral Oligomeric Silsesquioxane Acting as Cell Embryos for Polymer Foaming

Study on Mechanical Properties and Molecular Aggregate of the Dynamic Extrusion Polymer Filling System

Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends

Cell Morphology and Open-cell Behavior of PS in Compound Force Field

Batch Foam Processing of Polypropylene/Polydimethylsiloxane Blends

Effects of Blend Morphology on the Foaming of Polypropylene/ Low-density Polyethylene Blends during a Batch Foaming Process

Study on Properties of Filling Systems in Plastic Axial Vibration Injection Processing

Study on Cellular Structure of Acrylonitrile/ Methacylic Acid Copolymer Foam Plastic

Study on the Effect of Axial Vibration of Screw in Plasticating Process (Extrusion Part)

In-Situ Visualization of the Cell Formation Process of Foamed Polypropylene under Different Foaming Environments

Microcellular processing and relaxation of poly(ether ether ketone)

POROSITY PREDICATION WITH MICROSTRUCTURAL METHOD FOR OPEN-CELL ALUMINUM FOAM

Study on Extrusion Foaming of Polypropylene/Polydimethylsiloxane Blends

Simulation of Morphologies and Mechanical Properties of A/B Polymer Blend Film

Tensile and Impact Behavior of Polystyrene Microcellular Foams with Bi-Modal Cell Morphology

Vitrimer bead foams: Cell density control by cell splitting in weld-compression molding

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams