Abstract:Polymer nanocomposite foams have received considerable attention because of their potential use in advanced applications such as bone scaffolds, food packaging, and transportation materials due to their low density and enhanced mechanical, thermal, and electrical properties compared to traditional polymer foams. In this study, silica nanofillers were used as nucleating agents and supercritical carbon dioxide as the foaming agent. The use of nanofillers provides an interface upon which CO 2 nucleates and leads to remarkably low average cell sizes while improving cell density (number of cells per unit volume). In this study, the effect of concentration, the extent of surface modification of silica nanofillers with CO 2 -philic chemical groups, and supercritical carbon dioxide process conditions on the foam morphology of poly(methyl methacrylate), PMMA, were systematically investigated to shed light on the relative importance of material and process parameters. The silica nanoparticles were chemically modified with tridecafluoro-1,1,2,2-tetrahydrooctyl triethoxysilane leading to three different surface chemistries. The silica concentration was varied from 0.85 to 3.2% (by weight). The supercritical CO 2 foaming was performed at four different temperatures (40, 65, 75, and 85°C) and between 8.97 and 17.93 MPa. By altering the surface chemistry of the silica nanofiller and manipulating the process conditions, the average cell diameter was decreased from 9.62 ± 5.22 to 1.06 ± 0.32 μ m, whereas, the cell density was increased from 7.5 ± 0.5 × 10 8 to 4.8 ± 0.3 × 10 11 cells/cm 3 . Our findings indicate that surface modification of silica nanoparticles with CO 2 -philic surfactants has the strongest effect on foam morphology.

Inner Voids of Octavinyl Polyhedral Oligomeric Silsesquioxane Acting as Cell Embryos for Polymer Foaming

Application of a novel cavity nucleating agent based on cyclodextrin in polymer foaming materials and in situ visual injection moulding study

Synthesis of Poss-Based Star-Shaped Poly(Ionic Liquid)S and Its Application in Supercritical Co2 Microcellular Foaming of Polystyrene

Ultrasonic Irradiation Enhanced Cell Nucleation in Microcellular Poly(lactic Acid): A Novel Approach to Reduce Cell Size Distribution and Increase Foam Expansion

A Novel Hybrid Foaming Method for Low-Pressure Microcellular Foam Production of Unfilled and Talc-Filled Copolymer Polypropylenes

Synthesis of Ionic Liquids Copolymerize Styrene and Their Nucleation, Carbon Dioxide Sorption Effect on Supercritical Carbon Dioxide Microcellular Foaming

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends

Microcellular Crosslinked Silicone Rubber Foams: Influence of Nucleation Agent (polyhedral Oligomeric Silsesquioxane) on the Rheological, Vulcanizing, Cell Morphological Properties

Cell Morphology And Mechanical Properties Of Microcellular Mucell (R) Injection Molded Polyetherimide And Polyetherimide/Fillers Composite Foams

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents

Controlling Foam Morphology of Poly(methyl methacrylate) via Surface Chemistry and Concentration of Silica Nanoparticles and Supercritical Carbon Dioxide Process Parameters

Microcellular foams simultaneous reinforcing and toughening strategy of combining nano-fibrillation network and supercritical solid-state foaming

Regulating cell morphology of poly (lactic acid) foams from microcellular to nanocellular by crystal nucleating agent

Preparation of Polypropylene Foams with Bimodal Cell Structure Using a Microporous Molecular Sieve As a Nucleating Agent

Solid-state Polyetherimide (PEI) Nanofoams: the Influence of the Compatibility of Nucleation Agent on the Cellular Morphology

Enhanced Foaming Behavior of Ultrahigh Molecular Weight Polyethylene by Blending Silicone Powder in Microcellular Foaming

Formation Mechanism of Bi-modal Cell Structure Polystyrene Foams by Synergistic Effect of CO2-philic Additive and Co-blowing Agent

Preparation and characterization of microcellular injection molded foams from high-performance blends based on PPS-modified PPBESK

Study of Vibration Field on Microcellular Foaming in Nucleating Agents

The Study on Open-Celled Morphology of Polymer Blends in Vibration