Abstract:In order to improve the mechanical properties and durability of cement-based materials, a certain amount of multi-walled carbon nanotubes (MWCNTs) and polypropylene fiber (PP fiber) were incorporated into cement-based materials. The mechanical properties of the multi-walled carbon nanotubes/polypropylene fiber cement-based materials were evaluated using flexural strength tests, compressive strength tests, and splitting tensile tests. The effects of multi-walled carbon nanotubes and polypropylene fiber on the durability of cement-based materials were studied using drying shrinkage tests and freeze-thaw cycle tests. The effects of the multi-walled carbon nanotubes and polypropylene fibers on the microstructure and pore structure of the cement-based materials were compared and analyzed using scanning electron microscopy and mercury intrusion tests. The results showed that the mechanical properties and durability of cement-based materials can be significantly improved when the content of multi-walled carbon nanotubes is 0.1-0.15%. The compressive strength can be increased by 9.5% and the mass loss rate is reduced by 27.9%. Polypropylene fiber has little effect on the compressive strength of the cement-based materials, but it significantly enhances the toughness of the cement-based materials. When its content is 0.2-0.3%, it has the best effect on improving the mechanical properties and durability of the cement-based materials. The flexural strength is increased by 19.1%, and the dry shrinkage rate and water loss rate are reduced by 14.3% and 16.1%, respectively. The three-dimensional network structure formed by the polypropylene fiber in the composite material plays a role in toughening and cracking resistance, but it has a certain negative impact on the pore structure of the composite material. The incorporation of multi-walled carbon nanotubes can improve the bonding performance of the polypropylene fiber and cement matrix, make up for the internal defects caused by the polypropylene fiber, and reduce the number of harmful holes and multiple harmful holes so that the cement-based composite material not only has a significant increase in toughness but also has a denser internal structure.

MICROSTRUCTURES AND THEIR VARIATION MECHANISM OF A KIND OF POLYBLENDS FOR CEMEN TCONCRETE

Rheological properties of mortar and concrete with low binder content

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

EFFECTS OF CHEMICAL STRUCTURE ON THE PROPERTIES OF POLYCARBOXYLATE-TYPE SUPERPLASTICIZER IN CEMENTITIOUS SYSTEMS

Study on the Effects of Powder-Liquid Ratio and Cement Ratio on Mechanical Properties and Microscopic Characteristics of Polymer-Cement Composite

Identification of multi-scale homogeneity of blended cement concrete: macro performance, micro and meso structure

Effect Of Composite Polymer On Compressive Strength And Microstructure Of Concrete

Investigation of the Multiparameter Mix Proportion Design and Mechanical Properties of Polyvinyl Alcohol-Engineered Cementitious Composites

Properties of Polycarboxylate Superplasticizers with Different Molecular Structure: A Comparative Study

Multi-scale analysis of styrene butadiene latex modified PVA fiber concrete

A review on the modification mechanism of polymer on cement-based materials

Mechanical properties and micro-structure analysis of concrete adding high performance composite cementious material

Study on the Effect of Polycarboxylate Ether Molecular Structure on Slurry Dispersion, Adsorption, and Microstructure

Effect of the structure of macromonomer in polycarboxylate superplasticizer on viscosity and workability of concrete

Micro-characterizations and Geopolymerization Mechanism of Ternary Cementless Composite with Reactive Ultra-Fine Fly Ash, Red Mud and Recycled Powder

Mechanical Properties Evaluation of Polymer-Binding C-S-H Structure from Nanoscale to Macroscale: Hydroxyl-Terminated Polydimethylsiloxane (PDMS) Modified C-S-H

Study on the Properties of Multi-Walled Carbon Nanotubes (MWCNTs)/Polypropylene Fiber (PP Fiber) Cement-Based Materials

Microstructure of Steel Fiber Reinforced Polymer-Cement-based Composites

Optimizing concrete performance with polymer-cement networks: Enhanced flexural strength and crack resistance

Investigation of the Effects of Polyurethane-Modified Polycarboxylate at Ambient Temperature on the Characteristics of Cement with Supplementary Cementitious Materials

Synergistic effect of PTB emulsion, CaCO3 whisker and Nano-SiO2 on the properties of cement-based materials