Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

Identification of multi-scale homogeneity of blended cement concrete: macro performance, micro and meso structure

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

MICROSTRUCTURES AND THEIR VARIATION MECHANISM OF A KIND OF POLYBLENDS FOR CEMEN TCONCRETE

Hydration and microstructure evolution of a novel low-carbon concrete containing recycled clay brick powder and ground granulated blast furnace slag

Experimental study on strength and abrasion-resistance enhancement admixture

Study on Strength and Microstructure of Cement-Based Materials Containing Combination Mineral Admixtures

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Nanoindentation-based study of the micro-mechanical properties, structure, and hydration degree of slag-blended cementitious materials

Multi-scale Modelling and Statistical Analysis of Heterogeneous Characteristics Effect on Chloride Transport Properties in Concrete

Insights into the microstructure and mechanical properties evolution of hydration products in cementitious materials incorporating GGBFS

Study on concrete in macro-and meso-scale mechanical properties based on homogenization theory

The Synergistic Effects of Ultrafine Slag Powder and Limestone on the Rheology Behavior, Microstructure, and Fractal Features of Ultra-High Performance Concrete (UHPC)

Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber

The Influence of Slag Content on the Structure and Properties of the Interfacial Transition Zone of Ceramisite Lightweight Aggregate Concrete

Synergetic Optimizing Particle Size Distributions of Aggregate and Cementitious Materials: Toward Lower Chloride Diffusivity of Concrete

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Mechanical properties and micro-structure analysis of concrete adding high performance composite cementious material

The Effect of Homogenization Procedure on Mechanical Properties of High-Performance Concrete with Partial Replacement of Cement by Supplementary Cementitious Materials

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Mechanical properties and microstructure of ultra-high performance concrete with low cement content

Study on optimization of hydration process of blended cement