Abstract:Polycarboxylate superplasticizers BMC-L and BMC-S were utilized as modifiers in the formulation of novel cement-based grouting materials. Indoor tests were conducted on 32 groups of cement slurries, varying by water-cement ratio (0.5:1 and 0.6:1) and modifier content (0, 2‱, 4‱, 6‱, 8‱, 10‱, 12‱, and 14‱), to test their density, funnel viscosity, water separation rate, and stone rate. Four groups of slurry modified with BMC-L were selected as the preferred slurry, and the apparent viscosity test, uniaxial, and triaxial compression test of the slurry stone body were conducted. The study investigated the influence of BMC-L on various properties of the slurry, including its apparent viscosity, uniaxial compressive strength, stress-strain relationships, shear strength parameters, and elastic modulus. Ultimately, the pore structure and phase composition of the slurry stone body were detected by Nuclear Magnetic Resonance (NMR) and X-ray Diffraction (XRD), and the impact of BMC-L on slurry performance was examined from a microstructural perspective. Results indicate that the two polycarboxylate superplasticizers exert minimal influence on the density and water separation rate of the slurry. Within the effective incorporation range of the polycarboxylate superplasticizer, increasing the dosage correlates with a decrease in both the stone rate and viscosity of the slurry. BMC-L significantly enhances the mechanical properties of the slurry stone body by promoting more complete cement hydration and reducing porosity. The uniaxial compressive strength of slurry stone body with a 6 ‱ BMC-L dosage reached 29.7 MPa after 7 days and 38.5 MPa after 28 days of curing, representing increases of 118.4% and 64%, respectively, compared to masonry with 0 BMC-L dosage. The shear strength parameters and elastic modulus of the slurry stone body also showed corresponding increases.

Investigation of the Effects of Polyurethane-Modified Polycarboxylate at Ambient Temperature on the Characteristics of Cement with Supplementary Cementitious Materials

Interactions Between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials

Synthesis of a New Polycarboxylate at Room Temperature and Its Influence on the Properties of Cement Pastes with Different Supplementary Cementitious Materials

Synthesis of Polycarboxylate with Different Comb Structures and It's Influence on Properties of Fresh Cement Pastes

Physical and Chemical Influence of Polyacrylate Latex on Cement Mortars

Effects of Polycarboxylate Superplasticizers with Different Molecular Structure on the Hydration Behavior of Cement Paste

Effects of a polycarboxylate superplasticiser on the rheological properties of a Portland-sulphoaluminate cement composite slurry

A New Insight into the Mode of Action Between Cement Containing Montmorillonite and Polycarboxylate Superplasticizer

Effects of Polycarboxylate Superplasticizers on Fluidity and Early Hydration in Sulfoaluminate Cement System

Synthesis of Modified Polycarboxylate Superplasticiser and Its Effect on Cement Properties

Hydration, Mechanical Properties, and Microstructural Characteristics of Cement Pastes with Different Ionic Polyacrylamides: A Comparative Study

Adsorption and Desorption of Polycarboxylate Ether Superplasticizer in Fresh Cementitious Materials Blended with Mineral Admixtures

Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials

Effect of Hydrophobic Units of Polycarboxylate Superplasticizer on the Flow Behavior of Cement Paste

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers

Synthesis and Evaluation of Polycarboxylate-Type Superplasticizers with Different Carboxylic Contents Used in a Cement System

Influence of PCE on Rheological and Hydration Performances of Cement Paste

Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers

Effect of Organosilane-modified Polycarboxylate-Superplasticizer on Fluidity and Hydration Process of Cement Paste

Study on the Effect of Polycarboxylate Ether Molecular Structure on Slurry Dispersion, Adsorption, and Microstructure

Effects of Polymer-Cement Ratio and Water-Cement Ratio on Properties and Microstructure of Modified Mortars