Abstract:The addition of polycarboxylate superplasticizers (PCE) can alter the microstructure of dispersion system, and hence improve the fluidity of cement paste. In this paper, adsorption isotherms of PCE as well as the rheological and the hydration properties of cement paste have been systematically investigated. Cement hydration property was analyzed by isothermal calorimetry, differential thermal analysis (DTA), and thermogravimetric analysis (TG). The pore structures were investigated by mercury intrusion porosimetry (MIP) and dynamic water vapor sorption (DWVS). The microstructure and composition characteristics of hydration products were investigated by scanning electron microscopy (SEM) equipped with secondary electron imaging (SEI), backscattered electron imaging (BSE), and energy dispersive X-ray spectrometer (EDS). The results indicate that a higher PCE dosage leads to an increase of fluidity and a decrease of apparent viscosity as well as yield stress of fresh cement paste, owing to the disassembled flocculation and the released water from flocculation. The adsorption of PCE shows a double-layer adsorption behavior. The first adsorbed layer of PCE attributes to the zeta potential and the fluidity of cement paste, while the second adsorbed layer makes no contribution to these properties. The hydration degree of the cement paste is hindered by the addition of PCE at 1 day, but promoted at 3 days, while the promotion of hydration process almost vanishes at 28 days. The addition of PCE decreases the size of hydration products in hardened cement paste and changes the composition of hydrated calcium silicate (C-S-H) gel. The decreased porosity as well as average pore size due to good dispersion capability of PCE significantly improves the concrete performance.

Effects of Polycarboxylate Superplasticizers on Fluidity and Early Hydration in Sulfoaluminate Cement System

Effects of Comb-Like PCE and Linear Copolymers on Workability and Early Hydration of a Calcium Sulfoaluminate Belite Cement

Comparative Study of Two PCE Superplasticizers with Varied Charge Density in Portland Cement and Sulfoaluminate Cement Systems

Properties of Polycarboxylate Superplasticizers with Different Molecular Structure: A Comparative Study

Effect of Hydrophobic Units of Polycarboxylate Superplasticizer on the Flow Behavior of Cement Paste

Study on the Effect of Polycarboxylate Ether Molecular Structure on Slurry Dispersion, Adsorption, and Microstructure

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers

Effect of polycarboxylate superplasticizer and calcium nitrite on the fluidity and early strength of belite sulfoaluminate cement

Effect of Molecular Structure of Maleic Anhydride, Fumaric Acid – Isopentenyl Polyoxyethylene Ether Based Polycarboxylate Superplasticizer on Its Properties in Cement Pastes

Study on the Effect of Main Chain Molecular Structure on Adsorption, Dispersion, and Hydration of Polycarboxylate Superplasticizers

Effect of Chemical Structure on Dispersity of Polycarboxylate Superplasticiser in Cement Paste

Effects of a polycarboxylate superplasticiser on the rheological properties of a Portland-sulphoaluminate cement composite slurry

Influence of PCE on Rheological and Hydration Performances of Cement Paste

Effect of PCEs with Different Functional Groups on the Performance of Cement Paste

Effect of anchoring groups of polycarboxylate ether superplasticizer on the adsorption and dispersion of cement paste containing montmorillonite

Effect of Naphthalene-Based Superplasticizer and Polycarboxylic Acid Superplasticizer on the Properties of Sulfoaluminate Cement

Effects of Core-Shell Polycarboxylate Superplasticizer on the Fluidity and Hydration Behavior of Cement Paste

Synthesis and Application Properties of Polycarboxylate Superplasticizers

Effect and Mechanism of Superplasticizers on Performance of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Effect and Mechanism of Superplasticizers on Microstructure and Properties of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Mechanism and Temperature Sensitivity of Slow Releasing Polycarboxylate Superplasticizer by Copolymerizing Acrylate Monomers