Effect and Mechanism of Superplasticizers on Microstructure and Properties of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Zhang Jianwu,Xiao Wang,Biao Jin,Xiaoting Zhang,Zhixin Li,Xuemao Guan

DOI: https://doi.org/10.2139/ssrn.3976090

2021-01-01

SSRN Electronic Journal

Abstract:In the previous research, a novel ultrafine sulfoaluminate cement-based grouting material (USCBGM) has been prepared, which had better engineering application performance, such as fast setting and hardening, fast strength development, stone body micro-expansion and other properties compared with the traditional ultrafine cement. However, as an ultra-fine particle material, it is necessary to select appropriate superplasticizer in order to improve the fluidity of USCGBM paste. Based on this, the effects of Polycarboxylic acid (PCE) and Naphthalene (FDN) superplasticizers on the microstructure and properties of USCBGM were studied in this paper. The results showed that both PCE and FDN can effectively improve the initial fluidity of USCBGM paste, but the modification effect of PCE was better. The incorporation of PCE had little effect on the setting and hardening rate of USCBGM paste. Unlike PCE, the addition of FDN can significantly prolong the setting time of grouting paste. XRD, DSC-TG and SEM results showed the addition of PCE significantly increased the amount of ettringite hydration products in the hardened paste at the early hydration stage. Correspondingly, the hourly strength of hardened paste increased with the addition of PCE. Similar to PCE, the addition of FDN can also promote the formation of more ettringite hydration products in the hardened slurry at the early hydration stage. However, the difference is that the addition of FDN leaded to the characteristic of cluster distribution of ettringite crystals, which significantly affected the crystal skeleton effect of ettringite, leading to a marked reduction in the early strength of hardened paste.

English Else