Abstract:Xinjiang has a temperature difference of 20°C between day and night, interannual temperature difference of 50°C, the control of the temperature cracks in mass concrete becomes difficult. Although low-heat portland (P·LH) cement concrete containing fly ash (FA) can reduce hydration heat, the mismatch between its mechanical and thermal properties is still not fully resolved. An attempt to explore the effect of FA on the competitive hydration reaction of C3A and C3S at super-early ages, and how this effect changes the physical and chemical properties of hardened cement pastes by electrical resistivity and zeta potential and common microstructure test methods, and to provide a theoretical basis for optimization of mechanical and thermal properties of P·LH cement concrete with FA. Results showed that in the fast dissolution stage, a numerous {Ca6[Al(OH)6]224H2O}6+ ions and a very small amount of H3SiO4−/H2SiO42− ions were formed, and incorporating 20%, 30%, 40% FA primarily inhibited the Al(OH)63− hydration and the {Ca6[Al(OH)6]224H2O}6+ generation, resulting in the generation time of AFt in comparison with pure cement, respectively, delayed by 44%, 140%, and 524%. This phenomenon decreased the nucleation and crystallization growth rate of AFt and Ca(OH)2 in the induction stage, and reduced the consumption of gypsum in the acceleration stage. Hence, monosulfoaluminate did not exist for pastes with more than 30% FA, and the number of particles involved in the reaction for the P·LH cement stone with 20%, 30%, and 40% FA decreased by 4.0%, 46.5%, and 52.0% in the deceleration stage compared with the pure cement. The research results can provide a theoretical reference for modifying chemical properties of FA to meet the matching of mechanical strength and thermal of P·LH cement.

Effect of AH 3 -PCE Ultrafine Composites on the Properties of Sulfoaluminate Cement-Based Materials

Role of the structure of synthetic Al(OH)3 on the properties of sulfoaluminate cement-based materials

Effect and Mechanism of Superplasticizers on Performance of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Effect and Mechanism of Superplasticizers on Microstructure and Properties of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Effects of Polycarboxylate Superplasticizers on Fluidity and Early Hydration in Sulfoaluminate Cement System

Effects of Comb-Like PCE and Linear Copolymers on Workability and Early Hydration of a Calcium Sulfoaluminate Belite Cement

Effect of polycarboxylate superplasticizer and calcium nitrite on the fluidity and early strength of belite sulfoaluminate cement

Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field

Effect of superplasticizers on hydration kinetics of ultrafine sulfoaluminate cement-based grouting material

Insights into the effect mechanism of nano LiAl-LDHs on the early hydration of sulphoaluminate cement-based materials

Effect of calcium sulfoaluminate cement on the hydration process and water resistance of phosphogypsum slag cement

Effects of Retarding Admixture, Superplasticizer and Supplementary Cementitious Material on the Rheology and Mechanical Properties of High Strength Calcium Sulfoaluminate Cement Paste

Evaluation of the early strength of limestone-slag-cement ternary composite mortar improved by aluminum sulfate

Utilization of tricalcium aluminate as modifier on phosphogypsum-based full solid-waste cementitious material

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

The Effect of Incorporating Ultra-Fine Spherical Particles on Rheology and Engineering Properties of Commercial Ultra-High-Performance Grout

Effects of Aluminum Sulfate and Quicklime/Fluorgypsum Ratio on the Properties of Calcium Sulfoaluminate (CSA) Cement-Based Double Liquid Grouting Materials

Al(SO4)(OH)·5H2O Stemming from Complexation of Aluminum Sulfate with Water-Soluble Ternary Copolymer and further Stabilized by Silica Gel as Effective Admixtures for Enhanced Mortar Cementing

How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes

Effect of Naphthalene-Based Superplasticizer and Polycarboxylic Acid Superplasticizer on the Properties of Sulfoaluminate Cement

Effect of Calcium Carbonate Fineness on Calcium Sulfoaluminate-Belite Cement