Abstract:Calcium aluminate phases have a particular effect on the early heat release during setting initiation and have a substantial influence on the further workability of ordinary Portland cement. The nature of the calcium aluminate hydration products and its kinetics strongly depends on sulfate content and humidity. The effect of mineralisers on melt formation and viscosity is well described for calcium silicate systems, but information is still lacking for calcium aluminates. Therefore, the synergistic effect on the crystal structure and hydration mechanism of the tricalcium aluminate phase of the addition of mineralizers, i.e. Li 2 O, CuO, SO 3 to the raw meal is here investigated. Co-doped calcium aluminate structures were formed during high-temperature treatment. Thermal analysis (TG–DTA and heating microscopy) was used to describe the ongoing high-temperature reaction. Resulting phase composition was dependent on the concentration of the mineralizer. While phase pure system was prepared with low mineralizer concentrations, with increasing mineralizer content the secondary phases were formed. Raman spectroscopy and XPS analysis were used to investigate the cation substitution and to help describe the cations bonding in co-doped calcium aluminate system. Prepared powders have been hydrated in a controlled manner at different temperatures (288, 298, 308 K). The resulting calorimetric data have been used to investigate the hydration kinetics and determine the rate constant of hydration reaction. First-order reaction (FOR) model was here applied for the activation energy and frequency factor calculations. The metastable and stable calcium aluminate hydrates were formed according to initial phase composition. In phase pure systems with low S content, the formation of stable and metastable hydrates was depended on the reaction temperature. Conversely, in systems with secondary phases and higher S content, the hydration mechanism resembled that which appears in calcium sulfoaluminates.

Role of the structure of synthetic Al(OH)3 on the properties of sulfoaluminate cement-based materials

Effect of AH 3 -PCE Ultrafine Composites on the Properties of Sulfoaluminate Cement-Based Materials

Insights into the effect mechanism of nano LiAl-LDHs on the early hydration of sulphoaluminate cement-based materials

SYNTHESIS AND CHARACTERIZATION OF HIGH BELITE SULFOALUMINATE CEMENT THROUGH RICH ALUMINA FLY ASH AND DESULFURIZATION GYPSUM

Al(SO4)(OH)·5H2O Stemming from Complexation of Aluminum Sulfate with Water-Soluble Ternary Copolymer and further Stabilized by Silica Gel as Effective Admixtures for Enhanced Mortar Cementing

Study of Aluminum Sulfate and Anhydrite on Cement Hydration Process

Hydration Characteristics of Calcium Sulfoaluminate-Fly Ash Mixed with Different Alkalies

Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field

Hydration Kinetics Process of Low Alkalinity Sulphoaluminate Cement and Its Thermodynamical Properties

Hydration Mechanism and Phase Assemblage of Ternary Blended Cements Based on Sewage Sludge Ash and Limestone: Modified by Na2SO4

Properties of calcium sulfoaluminate cement-based grouting materials with LiAl-layered double hydroxides slurries

Hydration mechanism of calcium sulfoaluminate-activated supersulfated cement

Effects of Using Aluminum Sulfate as an Accelerator and Acrylic Acid, Aluminum Fluoride, or Alkanolamine as a Regulator in Early Cement Setting

Effects of Ordinary Portland Cement on the Early Properties and Hydration of Calcium Sulfoaluminate Cement

The Coordination of Aluminum Sulfate with a Water-Soluble Block Copolymer Containing Carboxyl, Amide, Sulfonic and Anhydride Groups Providing Both Accelerating and Hardening Effects in Cement Setting

MgO-based supersulfated cement with different industrial by-product gypsum: Experiments and molecular dynamics simulation

Hydration kinetics of C3A: effect of lithium, copper and sulfur-based mineralizers

Effect of calcium sulfate type and dosage on the properties of high-belite sulfoaluminate cement

Effect of the fineness of limestone powder on the properties of calcium sulfoaluminate cement

Effects of Sodium Sulfate and Potassium Sulfate on the Properties of Calcium Sulfoaluminate (CSA) Cement Based Grouting Materials

Preparation and Hydration of Brownmillerite-Belite-Sulfoaluminate Cement