Abstract:Oilfield sewage has a complex composition with large amounts of emulsified oils, polymers and surfactants. Efficient coagulants are required to purify such sewage to meet emissions standards. In this study, oxidized FeSO4·7H2O and NaHCO3were condensed by basic titration and polyferric sulfate phosphate (PPFS) was prepared by the addition of NaH2PO4·2H2O to improve its charge and stability. In addition, by adding modified palygorskite and cationic amylum, a functional polyferric sulfate phosphate, palygorskite and cationic amylum copolymer (PPFS-P-AM) composite coagulant was synthesized through self-assembly, and then used to treat oilfield sewage. The characteristic functional groups and crystal forms of the coagulant were characterized by FTIR and XRD. The zeta potential and radius of gyration (Rh) indicate that the introduction of palygorskite and cationic amylum enhance the charge neutralization and bridging adsorption abilities, respectively. The optimal dosage of cationic amylum is 5% in 80 mg·L−1 PPFS-P-AM, which provides turbidity and oil removal rates of 98% and 94%, respectively. Observation by SEM shows that the micro-morphology of PPFS-P-AM flocs has adendritic distribution with a reticular macromolecular structure that provides good sweeping performance during the sedimentation process. Finally, an analysis of its properties and performance reveals the mechanism by which PPFS-P-AM coagulates oilfield sewage. PPFS-P-AM provides better coagulation than the other studied coagulants via the synergistic effects of reinforced charge neutralization, bridging adsorption and sweeping.

Effects of Preparation Methods on Characterization and Coagulation Performances of Polyferric Sulfate (PFS)

Further Synthesis and Application of Polyphosphate Ferric Sulfate

Study on preparation,characterization and application of nano-sized polyferric sulfate coagulant

Hydrolysis and coagulation behavior of polyferric sulfate and ferric sulfate

Preparation and Application of Slag Compound Flocculant

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Experimental Study on Preparation of Polymeric Ferric Phosphoric Sulfate by Bio-oxidation Andfractal Characteristics of Flocs at Different Preparation Parameters

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

Synthesis, Characterization, and Coagulation of Polymeric Ferric Sulfate

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Preparation and performance characterization of solid polyferric sulfate(SPFS) water purifier from sintering dust

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Batch Preparation of High Basicity Polyferric Sulfate by Hydroxide Substitution from Bipolar Membrane Electrodialysis

Study on Manufacture and Technology Optimization of Solid Polymerized Ferric Sulfate

Evaluation of the self-assembled functional PPFS-P-AM composite for treating oilfield sewage

Research on the preparation of composite polysilicic acid flocculants and their performances